Like windows and doors, air vents are just one more way for noise to get into a room. So if you’re already working on soundproofing a room, you’re going to want to pay special attention to soundproofing the air vents as well.
Today, I’ve compiled a list of ways to improve this area of our rooms. Whether you want to get rid of the ventilation entirely or you still want to have some airflow, there are several ways to achieve both results.
Best of all, you can use these techniques with any other soundproofing methods you decide to implement. But before we talk about the ways you can soundproof your air vents, let’s answer the obvious question.
Can You Soundproof the Vent Without Impeding Airflow?
To answer this question in a word: no. You can’t really expect to install any soundproofing materials over your air vents without them messing with the airflow. After all, the more open you leave that space, the more noise will be able to get in. And the more you try to close the space off, the quieter it will be.
Even the methods that are meant to keep the air going in and out of the room are going to obstruct the airflow a bit. Most of the noise we hear on a daily basis is airborne. So, as you can imagine, that means that we’re actually trying to reduce airflow.
Still, depending on your preferences and soundproofing goals, you may even want to close the vent entirely. As with any other soundproofing project, the most important thing you can do is determine exactly what you want to accomplish. Ideally, you’d find the middle ground between your audio needs and the needs of the room.
For example, if you want the room to be completely silent, the best option would be to close the vent hole. However, if the room only has one window, it would need that extra airflow coming from the vent. So you’d need a solution that reduces the noise coming through the vent but still lets the air come through. But, naturally, that’s easier said than done.
This compromise is incredibly important, especially when we’re talking about airflow vs. quiet. One isn’t better than the other. Obviously, I’m a firm believer in the fact that a quiet home is a happy one. But I also believe in the power of fresh air, so you really shouldn’t have to sacrifice one for the other.
Is Your Air Vent Letting in More Noise Than It Should?
Once you know what you want from the space you’re working on, choosing the method you want to implement will be easy. Here’s how to prepare the room with the vent for the work you’re about to do:
- To begin with, you’ll want to clear away the area surrounding the vent.
- If it’s high up on the wall or on the ceiling, get a ladder. If it’s lower down, make yourself comfortable on the floor. You can even grab a pillow to kneel on if you think you’ll be working on it for a long time.
- You’ll likely see a metal grate over the vent, so you’ll also need your screwdriver or a drill with the appropriate bits to take out the screws.
- Once you remove the grill, you can check out the inside of the vent with a flashlight. Although, you can also take a peek through the grate.
But what are some of the things that indicate your air vent is letting in more noise from your neighbors or housemates than it should?
There are three main reasons for hearing everything through the vent:
- The shape of the duct connecting vents in two different rooms to each other is enabling the passage of sound. Usually, this happens if the vents are straight across from each other, so the sound doesn’t have to turn any corners on its way between the two rooms.
- There aren’t enough obstacles inside the duct that the sound could bounce off of, so the noise isn’t getting disrupted. Unlike the previous point, this one is pretty easy to solve, as you’ll see later on in this article.
- The air vent is loud because it is not made of particularly absorbent materials. Of course, metal isn’t the best material to use if you’re looking for sound dampening.
So when you’re looking at your vent, pay attention to those potential problem areas. This way you’ll know exactly what’s missing from your air vent and even how to fix it. From here on out, it’s going to be a pretty common-sense type of project. Still, let’s go through some ideas on how you can reduce the noise coming through your air vents.
6 Ways to Soundproof Your Air Vent
Because the easiest and most effective solutions to stop noise from coming through air vents involve closing off the holes entirely, I’ll start by suggesting 3 ways to do that. These range from permanently blocking off the vent to using temporary and removable measures. And, after I tell you about those, we can discuss some of the soundproofing methods that will still allow air to pass through the vent.
1. Block Off the Air Vent Entirely With Drywall
The first thing you can do to seal the vent off permanently is to treat it like a wall. You can either fill the duct entirely or just put in wooden studs at the very beginning of the duct, after you remove the grate. Then, you can stuff it with insulation or just close it off with drywall. Finally, you’ll seal the area around your piece of drywall with wall base adhesive to make it blend in.
After everything dries, you can sand the area and wipe it clean, then paint it to match the wall. As you can see from the video below, this technique is very clean and effective — and pretty easy to do as well. However, if you don’t have that much of a budget at your disposal, I recommend trying one of the other tips.
Of course, the simpler and sloppier version of this technique is to flatten the grate and stuff it with gypsum directly. After you’ve plastered over the grate, you can proceed like they did in the video, smoothing the plaster until it blends in. Although I’ve actually seen some people use this method successfully, I’d much rather do a job correctly the first time around. But if you’d rather just get it over with, this is one way to do it.
A word to the wise, though: you’re only going to want to do this if the air conditioning isn’t active. If the AC is actively working through the ventilation system, it will cause condensation to gather. So, in that case, you can adapt this method by using waterproof materials or putting a waterproof tarp before the studs and insulation.
2. Fill the Opening With an Acoustic Sealant
If you want similar results to the ones you’d get with drywall and gypsum, you can look into using an acoustic sealant to plug your vent. Now, I’m not talking about the acoustic caulk you’d use to seal the cracks around your windows. Instead, something like the Great Stuff Big Gap Filler would do nicely.
This product is a foam sealant, so it actually expands to fill the surface you’ve applied it to. Once it sets, it’ll be airtight and water-resistant. Additionally, you’ll also be able to sand it to fit into the rest of the wall and paint on top of it.
If you intend to fill the whole duct with this product, you can do so. However, you ought to get enough of the insulation foam to fill the volume of the space you’re working with.
Before you get to work, make sure your gloves are on. You can then remove the vent covers on both sides of the duct if you’re planning to fill the entire space. Then you can fill the space and even put the vent grates back on to keep your room looking as it did before. The whole project should take only a few minutes to apply and a few minutes to set and cure.
On the other hand, you can also only fill the space near the vent itself. Since the product is water-resistant, it should be able to withstand the condensation a working ventilation system might generate. So you can also put the foam in and blend it into the wall or even plaster over it to get the right consistency.
3. Cover the Vent With Soundproof Curtains or Blankets
Of course, one of the easiest ways to soundproof your air vents is to cover them with soundproof blankets or curtains. I’ve already written about just how magical both of these products are. Essentially, they’re thicker and more densely woven than regular blankets or curtains (although a regular thick blanket will work in a pinch).
While all of these tips would be easier to apply to wall vents, you could even do them for ceiling air vents. If you’re installing a regular soundproof or moving blanket, you can nail it to the wall or ceiling. However, grommeted blankets would be easier to hang like curtains.
Or, you can save yourself the hassle and just get the soundproof curtains. Install a curtain rod on the wall above the vent or along the ceiling and hang the curtain, making sure that it’s pooling on the floor. This will ensure that you’re fully covered — and it would thicken up your walls as well. Still, I’d use this tip with one of the following two air vent soundproofing methods.
4. Make a Sound Maze Inside of the Vent
There are plenty of reasons why you might want or even need to keep new air flowing into the room. The most obvious reasons why you might need the extra airflow is if the room itself only has a single small window. However, if there’s a possibility of mold growth in the room, you will definitely need to keep the vent functional. And, of course, you can also use this technique for your own reasons as well.
If you’ve never heard about the maze method before, this might seem a bit crazy. But stay with me. Creating a maze inside your vent is a great way to add absorbent materials and walls for the sounds to bounce off of.
You’ll attach these walls to the sides of the duct so that the air is forced to move in a zig-zag motion. This, of course, will force the sound waves to bounce multiple times, which will make them lose momentum and dissipate more quickly. Because the air will still be able to get through, this method would result in the room having sufficient air flow. However, you’d still have a significant noise reduction.
Materials You’ll Need
If you’d like to try this technique out, you can start by collecting the tools you’ll need. After all, being prepared is half the battle. So if you want to set yourself up for success, you can get:
- A step ladder, if your vent is high up on the wall or even on the ceiling.
- A screwdriver or a drill with the correct bits. You’ll be using those to unscrew the grate of the vent.
- A wood saw or a jigsaw to cut the boards with.
- Thin plywood that’s half an inch thick at most. You can cut several boards to be a bit narrower than the width of the duct. They also need to be a bit longer than half the height of the duct.
- Adhesive, such as the Gorilla Wood Glue.
- Thin acoustic foam — so not the one you’d use on your walls. Instead, you’ll want to use a thinner alternative, such as the one Silverstone makes. Their product is only 0.15-inch thick, so it won’t take up too much space in the vent.
- A utility knife or scissors to cut the foam with.
- A ruler or another measuring tool.
Finally, you’ll also want to make sure that you have a workstation. If you have had experiences with home projects like this one, you may be able to use the saw without damaging another surface. However, it’s always a smart idea to cover your bases.
Step-By-Step Instructions for Building a Sound Maze
Here’s how to create a sound maze inside your vent:
- Measure the duct: Once you have all of your materials, you can prepare the maze walls. As I’ve previously mentioned, they should be narrower but as tall as your duct. So you can use your measuring tape to measure the dimensions of the duct, then transfer them to the plywood.
- Cut the boards: Cut the first piece and check if it fits into the duct. If it does, you can cut the rest of the plywood to that size. The more boards you make, the more obstacles the sound waves will run into.
- Glue acoustic foam to the boards: Glue your thin acoustic foam to the boards with the wood adhesive. You can cut the foam down to size before you glue it on or trim off the excess after it’s on the board.
- Open the vent cover: Now that you have your maze walls, you can open the vent cover or grill. This is where you might need that ladder.
- Install the first maze wall: The number of wood and foam maze walls you end up with will determine how far into the duct you place your first wall. Use the glue on one or two sides of the plank and position the first one inside the duct, then hold it a bit until the adhesive sets.
- Create a zig-zag pattern: The next piece you position will be on the opposite side of the duct. So if you glued the first wall on the left side of the duct, you can put the next in the right corner. That would give the maze that zig-zag pattern. Leave at least an inch of space between each wall — you can make a tighter maze, but it would impede the airflow more.
- Put the vent grill back in place
5. Stuff the Vent With Acoustic Foam
If you already have pieces of egg crate pattern acoustic foam lying around, you can use them to plug your air vent. Take some 3M spray adhesive and apply it to the flat side of one of the acoustic foam pieces. Then press that piece back to back against another one.
Once the adhesive dries, you can cut the foam to approximately the size of your duct. It’s okay if you end up with a piece that’s a bit larger than the duct. The foam will bend a bit and seal the space.
Lastly, there’s another way to create a plug for your air vent.
6. Plug the Vent Grate
If your vent is letting in a lot of noise, it’s probably also causing a draft or even preventing your room from heating evenly. Well, putting a temporary plug on it could help with all of these issues.
One way to do this is to create a plug out of the grate cover itself. Unscrew the cover and bring it to your workstation. Measure the actual grates from the inside and transfer those measurements to a quarter-inch thick piece of plywood. Cut the piece down to size and put it over the grate on the inside, then tape it down.
You can use liquid glue to hold it if you’re planning on making this a lasting change. However, I believe that temporary solutions are always preferable until you know the effects. So you can even use waterproof tape to stick the wood to the grate and cover the whole board if AC condensation is a problem.
If you need to, you can also apply some weatherstripping tape along the inside edges of the vent cover, to make sure that no noise will get past it. Finally, you can screw the cover back onto the vent. If you’re more of a visual learner, you can see how this is done in this video.
This solution would still leave you with a functional air vent. All you’d have to do to reverse the results is take the board off the grate. You can even keep the tape and board on hand, for the next time you want to close off the vent.
Final Thoughts on Reducing Noise From Air Vents
Hopefully, one of these methods will solve your noisy vent problem. Ultimately, you’ll need to choose the appropriate solution depending on your needs and the needs of the room.
If you’re not really using the vent anymore, it’s best to cover it entirely. However, if you still need the airflow, you can use one of the last few techniques to get the quiet room of your dreams.
- How To Reduce Noise From Return Air
- Quietest Through-The-Wall Air Conditioners
- How To Soundproof A Window For Cheap
- Mass Loaded Vinyl: What You Need To Know