Quiet Products – Soundproof Living https://soundproofliving.com Working Toward a Quieter Life Thu, 11 Nov 2021 14:42:27 +0000 en-US hourly 1 https://wordpress.org/?v=5.8.2 https://soundproofliving.com/wp-content/uploads/2018/05/cropped-spl-favicon-blue-32x32.png Quiet Products – Soundproof Living https://soundproofliving.com 32 32 The Best Soft-Close Cabinet Hinges for Kitchen or Bathroom Cupboards https://soundproofliving.com/best-soft-close-cabinet-hinges/ https://soundproofliving.com/best-soft-close-cabinet-hinges/#respond Thu, 11 Nov 2021 11:36:05 +0000 https://soundproofliving.com/?p=10867 As you replace the noisy devices and appliances in your home with quieter alternatives, you’ll inevitably start discovering more structural problems. Everything that doesn’t do …

The Best Soft-Close Cabinet Hinges for Kitchen or Bathroom Cupboards » Read More «

The post The Best Soft-Close Cabinet Hinges for Kitchen or Bathroom Cupboards appeared first on Soundproof Living.

As you replace the noisy devices and appliances in your home with quieter alternatives, you’ll inevitably start discovering more structural problems. Everything that doesn’t do its job silently will become much more noticeable, from squeaky floorboards to door hinges. Even the sound of closing cupboard doors could start bothering you — which is why you should consider upgrading to the best soft-close cabinet hinges.

Best soft close cabinet hinges for all kinds of cupboards.

Are Soft-Close Hinges Any Good?

Soft-close hinges are the latest technological advancement that can take your kitchen and bathroom cabinets to the next level. The hydraulic piston system inside the hinge kicks in when the door comes within an inch or two away from closing. In essence, the joint catches the door before it comes into contact with the cabinet box, preventing noise and physical damage. That’s how these add-ons can maximize the longevity of your elements.

Most importantly, most soft-close hinges are adjustable in more ways than basic free-swing hinges are. In addition to being able to tweak the distance of the door from the cabinet box and its angle, these hinges allow you to control the speed at which the door closes. They are also less noticeable than physical or mechanical bumpers.

Ultimately, a slamming cabinet door could get as loud as 90 decibels. Even though that’s usually a short burst of sound, hearing such a loud noise is never pleasant. Luckily, good hinges could bring that down to 29 decibels or less. You just have to know how to pick the right product for the job.

How to Choose the Right Soft-Close Hinges for Your Cabinets

There are many things you should keep in mind when shopping for soft-close hinges. You’ll have to take into account the style of your cabinets as well as the type of doors they have. Knowing that will help you figure out the dimensions you need to look for. The range of motion and the materials the hinges are made of are also important considerations.

You should also check whether the hinges you’re looking at come with any additional mounting equipment. However, before you go into those details, you should make sure the products you’re looking at are, indeed, soft-closing.

Make Sure They Have Soft-Close Properties

If you were to walk into your local home improvement store and ask for hinges, they’d probably present you with three types:

  • Free-swing ones are the cheapest and most common kind, without any built-in mechanism
  • Self-closing ones have a spring-loaded mechanism that detects when a door is about two inches away from the cabinet and pulls or snaps it shut
  • Soft-closing ones are like the previous type, except they have a piston mechanism that slowly draws the door shut instead of snapping it.

For example, as cool as they look, these matt black hinges aren’t going to close your cabinet doors quietly. However, they do come with about fifty of those plastic bumpers that should protect your cabinets from the sharp closing mechanism. Of course, that won’t completely eliminate the noise. So if you really want black hinges, make sure they’re the right kind!

Identify Your Cabinet Style

One of the most important things you’ll have to consider when choosing your hinges is the type of cabinets you have. That will determine the mounting style you’ll need to get.

Most American households have face-frame cabinets, which means that their cabinet boxes have a frame surrounding the front edge. Those are usually between an inch and a half and two inches wide. If your cabinets have a ledge like that, your hinges would be attached directly to that bit of solid wood.

On the other hand, if you have European-style kitchen or bathroom elements, you might have frameless cabinets instead. Those have an open front with exposed edges, making it possible to attach your hinges directly to the inside walls of the cabinet box. Crucially, these two styles of cabinets correspond with different kinds of hinges.

While you’re examining the shape of your cabinets, you might also spare a thought for the positioning of the doors. They can be:

  • Full-inset ones, which are fully inside the cabinets and flush with the front edge when shut
  • 3/8 inset, meaning that they’re halfway inside the cabinet thanks to lipped doors which usually have a rabbet
  • Overlay or half-overlay doors, which overlap with the sides of the cabinet or the face frame

Since the last type is the standard, the following instructions and product recommendations may skew toward overlay styles.

Check the Size and Quantity

If you’re looking for hinges to replace the ones you have, you should get your measuring tape out before you go shopping. Firstly, you’ll need to measure the cup depth of your current hinges — that’s the circular part that goes on the door. Your new hinges will need to match the existing hole unless you want to expand it.

Depending on the design of the joints you have in place, you may have to remove them to accurately measure the cup depth. Alternatively, you could try sticking the tip of your tape measure into the cup while the hinge is still on the door.

If you have overlay cabinet doors, you’ll also want to check the overlap between the door and the cabinet box. Simply measure the distance between the outer edge of the cabinet door and the inside edge of the face frame. Following the tutorial in this video should help you get the dimensions you need. On American-style cabinets, that overlay is usually either half an inch or an inch and a quarter long.

Remember, if you install the wrong joints, you may end up with crooked cabinet doors. Or worse, you might waste money on items that don’t even fit into the preexisting drill holes. So remember to measure twice — and order the right hinges right off the bat.

While you’re jotting down numbers, you should also count the number of hinges you want to replace. The products we’re about to review come in packs of 10, 20, 50, 100, or more — so figure out how many you need in advance.

Consider the Range of Motion

Most hinges are capable of a certain range of motion, which is usually expressed in degrees. Ones that can push a door out to a position that’s perpendicular to the cabinet box are standard. If you want your cabinets to be able to swing a bit wider than a right angle, you can get 105 or 110-degree hinges. Just make sure to check product descriptions for that kind of information.

Durability and Construction

The way your cabinet hinges were made — and the materials that were used in the process — are both pretty important factors to consider. After all, they can reveal how long the products you’re looking into will last.

Most of the hinges we’re about to review are made of stainless steel, though some also have a nickel finish. Both of those materials are usually chosen for their durability and corrosion-resistant properties. Since kitchen and bathroom cabinets tend to be surrounded by a lot of moisture, having rust-proof hinges is crucial.

Mounting Style and Accessories

Last but not least, you should also make an effort to discover whether the hinges you’re considering come with mounting equipment like screws. Many do, but if the ones you want to get don’t — it’s nothing to worry about. After all, you can find the small screws you’ll need pretty much anywhere. And, if you’re merely replacing your old joints, you can always reuse the screws that are holding them in place now.

You should also keep in mind the shape of the hinges, as that may affect the installation. The plainest kind looks like metal plates that are screwed into the cabinets. However, many have a circular cup that embeds into a corresponding hole in the cabinet door to provide a more secure fit. If your cabinet doors don’t have that space already, get a drill bit that has the circumference you need.

7 Best Soft-Close Cabinet Hinges on the Market

Now that you know how to find the best soft-close hinges for your cabinets, let’s see the contenders!

1. DecoBasics 105 Degrees Overlay Soft-Close Cabinet Hinges

If you’re looking for simple, standard hinges for face-frame cabinets with overlay doors, check out DecoBasics. The soft-close piston mechanism fits neatly into the hinge cup, which slides into the universal cavity measuring 0.45 inches deep and 1.37 inches across.

DecoBasics Soft Close Cabinet Hinges -Face Frame 1/2 Inch Overlay (Pack of 50) -Quite Slow Self Closing Kitchen Cabinet Hinges -3 Way Adjustability & Easy Installation

Each hinge comes with three screws — two to fit around the cup and one to go through the frame of your cabinet. Notably, the two screws around the cup are 1.77 inches apart, so keep that in mind if you’re replacing old hinges. Since these are standard cabinet hinges first and foremost, they also have three adjustment screws. That should let you move the door horizontally, vertically, and away from the cabinet even after installation.

Depending on your needs, you’ll be able to get these in pairs or in packs containing up to a hundred pieces. Just make sure to measure the overlap of your cabinet doors properly. Once you know if the overlay is 0.5, 0.75, or 1.25 inches long, you’ll be able to select the right DecoBasics hinges for them.


  • 2–100 steel hinges with mounting screws
  • 0.45 inches deep and 1.37 inches wide cup
  • 105-degree opening angle
  • Suitable for face-frame cabinets with 0.5–1.25-inch overlay doors

2. Berta 110 Degrees Full-Overlay Soft-Closing European Hinges

If you have frameless cabinets, the previous suggestion won’t work for you. In that case, you might consider these full-overlay hinges from Berta instead.

Berta (25 Pieces) Full Overlay Frameless Soft Closing European Hinges, 110 Degree 3D Adjustable Clip On Concealed Kitchen Cabinet Door Hinges with Screws

These hinges consist of several parts that can be taken apart, which should make the installation process easier. After fitting the cup into the circular cavity on the cabinet door, fasten the screws on either side. They should be 1.77 inches apart, though the two screws you’ll put into the side of the cabinet wall are only 1.25 inches apart.

Once both sides of the steel hinges are in place, you’ll extend the straight arm of the hinge and connect it to the door, clipping it in place. The finished product should give you 110 degrees of movement.


  • 1–50 stainless steel clip-on hinges with mounting screws
  • 0.45 inches deep and 1.37 inches wide cup
  • 110-degree opening angle
  • Suitable for frameless cabinets with overlay doors

3. Ravinte 0.5–1.5-Inch Overlay Soft-Close Hinges

These stainless steel hinges from Ravinte really are the best of both worlds. In addition to having an effective soft-close piston, they also have a self-closing spring mechanism. So when you push your cabinet doors closed, they’ll pull them flush against the cabinet without any unnecessary noises.

Ravinte 50 Pack 25 Pairs 1/2 inch Overlay Soft Close Hinges for Kitchen Cabinet Hinges Satin Nickel Hidden Hinges Stainless Steel Concealed Hinge self Closing

The nickel-finished hinges come in packs of 2, 6, 10, 20, 30, 50, and 60. So you’ll have enough to convert a single cabinet or all the cupboards in your house. These joints should fit onto face-frame cabinets with an overlay of 0.5, 0.75, 1.25, or 1.5 inches.

When you install the hinge onto the frame of the cabinet, you’ll see that the screw hole in the middle is only slightly elliptical. Usually, that would mean that you can’t adjust the door vertically. In this case, the surrounding three screws will still allow you to align the door properly.

The circular cup on the door side of the hinge is about 0.45 inches deep and 1.37 inches wide. Meanwhile, the two screws that surround the cup are about 1.77 inches apart. That should tell you whether you’ll need to drill new holes.


  • 2–60 nickel-covered stainless steel hinges
  • 0.45 inches deep and 1.37 inches wide cup
  • 105-degree opening angle
  • Suitable for face-frame cabinets with overlay doors

4. Konigeehre 100-Degree Soft-Close Cabinet Door Hinges for Half-Inch Partial Overlay Cupboard

Unlike some other manufacturers, Konigeehre uses a metal hydraulic mechanism instead of a plastic soft-close system. Rather than having a plastic connector between the door and the cabinet, these stainless steel hinges rely on a connection made up of six steel pieces. But that’s not the only thing that makes this product special.

KONIGEEHRE 20 Pack Soft Close Cabinet Door Hinges for 1/2" Partial Overlay Cupboard, 100 Degree Opening Angel, Stainless Concealed Kitchen Cabinet Hinges with Mounting Screws and Manual

Thanks to their universal design, these hinges should fit frameless cabinets as well as face-frame ones. In either case, they will overlay half an inch of the frame — or, rather, the inner wall of the cabinet.

The pack of 20 nickel-plated hinges comes with 20 plastic bumpers — though you probably won’t need them. On top of that, you’ll also get 80 mounting screws. Before you start pushing those in, you’ll need to make sure the cup fits the cavity in the cabinet door. For reference, it should be about half an inch deep and 1.37 inches in diameter.

The two screw holes around the cup are 1.77 inches apart while the ones that will go on the cabinet are 1.3 inches apart and more elongated. That will give you some wiggle room when you go to install them. As usual, the hinges also have several adjustment screws that will let you tweak the doors’ position in 6 directions. Once you get the doors on, they’ll be able to swing out by 100 degrees and close soundlessly.


  • 20 nickel-plated stainless steel hinges with 80 mounting screws and 20 bumpers
  • Half an inch deep and 1.37 inches wide cup
  • 100-degree opening angle
  • Suitable for face-frame or frameless cabinets with a half-inch overlay

5. Blum 1.25-Inch Overlay Soft-Close Cabinet Hinges

Most people who are interested in furniture flipping are familiar with Blum products and especially the company’s proprietary Blumotion compact, which provides the soft-closing function of the hinges we’re about to discuss. In this case, though, the hinge mechanism allows users to turn the soft-close system on and off.

Blum B039C355B.20 1-1/4" Overlay Soft Close Cabinet Hinge (10 Pack), Nickel Plated Steel (Pack of 10)

While these hinges are the more common choice, this list could use some variety. With that in mind, I decided to check out the company’s one-piece wraparound hinge. The product should fit around the edge of a face-frame cabinet with a 1.25-inch overlay door. The cup on the other end of the hinge should slide right into a standard cavity size.

Once installed, the nickel-plated steel hinge will allow your cabinet doors to swing out to 110 degrees. If you’re interested in having wraparound hinges from Blum, you can get these with or without mounting screws. They come in packs of up to 50 hinges, so you can spruce up all of your cupboards at once!


  • 1–50 nickel-plated steel hinges with or without screws
  • Standard cup size
  • 110-degree opening angle
  • Suitable for face-frame cabinets with 1.25-inch overlay doors

6. Tambee 175-Degree Full-Overlay Hydraulic Soft-Close Hinges

These TamBee hinges are a unique entry on our list because of the incredible range of movement they allow. Rather than sticking to the 100-degree range, they’ll let you swing that door open to 175 degrees. Still, that kind of mobility does come with additional bulk and a somewhat awkward appearance.

TamBee 175 Degree Hinges Frameless Cabinet Doors Hinges Concealed Hydraulic Adjustable Mounting Hinges Soft Closing Nickel-Plated Steel Buffer Dampers for Wardrobe,1 Pair (Full Overlay)

Overall, the hinge is about 5.35 inches long and 2.56 inches wide, which makes it the largest product on this list. Moreover, the arm of the hinge is actually detachable. That lets you install the part that goes on the door and the one that goes on the inside of the cabinet box separately.

Simply fit the 0.47 by 1.38-inch cup into its cavity and affix everything with the screws that come with the pair of hinges. Once you have done that, you can simply clip the door portion of the hinge into the part you have screwed into the cabinet. If you need to make any adjustments, you can just use the alignment screws on the hinges.

Due to their specific design, these hinges won’t work on inset doors or face-frame cabinets. Instead, you’ll need to pair them with frameless cabinets and full or half-overlay doors. Still, if you want to have a wide range of motion, there’s no better option than this one.


  • A pair of nickel-plated steel hinges with mounting screws
  • 0.47 inches deep and 1.38 inches wide cup
  • 175-degree opening angle
  • Suitable for frameless cabinets with overlay doors

7. JQK Matte Black Full-Overlay Frameless Cabinet Hinges

Last but not least, if you’d rather have black hinges, these soft-closing ones from JQK are as good as they come. The company makes versions of this product to fit full and partial overlay cabinet doors as well as inset ones. All of them should help your cabinet doors swing out to 100 degrees.

JQK Cabinet Hinges Black, 100 Degree Soft Closing Full Overlay Door Hinge for Frameless Cabinets, Stainless Steel Matte Black Finish, 4 Pack, CH100-PB-P4

Notably, these hinges should fit doors that are 0.55–0.86 inches wide. That would allow them to slip into the 1.37 by half-inch cup cavity. The two screw holes around the cup are just about 1.9 inches away, which is slightly wider than usual. Meanwhile, the holes on the cabinet side of the hinge are 1.28 inches apart.

Like the other stainless steel hinges on this list, these ones will have no trouble functioning in wet or dry environments. They’re durable and adjustable — anything you could want from a hinge. And, since they are matte black, they also come with matching screws.


  • 4 black stainless steel hinges with matching screws
  • 0.47 inches deep and 1.37 inches wide cup
  • 100-degree opening angle
  • Suitable for frameless cabinets with full overlay doors

How Many Soft-Close Hinges Should You Get per Cabinet Door?

While soft-close hinges are no longer as expensive as they used to be, they’re still pricier than free-swing ones. That may factor into your final decision, particularly if you have tight budget constraints. With that in mind, let’s talk about a solution some people turn to in those circumstances. Is it possible to only replace a few joints instead of doing a complete overhaul of your cabinets?

Well, if you have to convert many cabinets without breaking the bank, you could try replacing only one hinge per door with a soft-close alternative. If the door isn’t too heavy, one hinge may effectively catch it before it slams shut. However, if you have enough money to revamp all of your cupboards, you should replace all of the existing hinges.

Of course, if you’re looking to buy hinges for brand new kitchen elements, you’ll have to start from scratch. So how many joints should you get for each cabinet door? The calculation is relatively simple. Since the size and strength of the hinges are relatively consistent across different brands, the number of bearings you’ll need will depend on the weight and height of the doors.

Most cabinet doors don’t require more than two hinges. However, if the door in question is more than 40 inches tall or more than 10 pounds heavy, you might want to consider putting in a third hinge. Furthermore, if the height of a cabinet door exceeds 60 inches, a fourth hinge may be necessary. Generally, longer and heavier doors need more joints.

How to Install Your Soft-Close Cabinet Hinges

Once you order your new cabinet hinges, you should prepare to install them. To do so, you’ll need a screwdriver or a drill with the right drill bit to remove your current cabinet joints. On top of that, you might want to get some wood filler and paint. Those might come in handy if you end up having to plug the holes where the old screws used to be.

Detach the Door

To replace the old hinges, you’ll first need to detach the cabinet doors. Depending on the kind of joints you have in place, you’ll either clip the door part of the hinge off or unscrew the part that’s attached to the cabinet itself. However, before you do so, you might want to use a pencil to mark the underside of the hinge part that’s attached to the face frame. If nothing else, that’ll help you place your new parts later on.

Replace the Hinge

In any case, once the doors are off the cabinets, bring them to a flat surface. Remove the screws that are holding the old hinges to the door and wiggle them out of the cup cavity. At that point, you could simply pop the new hinge into place. If you have measured correctly before ordering, you won’t have a problem there.

Even so, the previous screw holes may not line up with the new hinge. In that case, you can plug them with wood filler and drill new holes for your screws. Just remember to square up the flat edge of the hinge before inserting those screws.

The adjustments on the hinge should let you shift the doors a bit even after you install them. Still, you should do your best to line the hinges up properly while you’re installing them. The last thing you want to do is go back to drilling screw holes after you see the door drooping on your cabinet.

Put the Door Back On

Once the hinges are securely installed on the cabinet doors, you’ll need an assistant. With someone else holding the door, you’ll be able to screw the other side of the hinge into the face frame. Make sure the bit is right on the line you drew earlier before you push the screw in. That should bring an end to any cabinet door slamming that may go on around your house!

Additional Ways to Prevent Cabinet Doors From Slamming Shut

There are several ways to eliminate the sounds cabinet doors make as they close. If you’re looking to get rid of the stray squeak, you can lubricate the hinges or replace them with plain free-swing ones. But if you’re in the habit of pushing your cabinet doors and letting them shut on their own, you’ll certainly benefit from installing some impact dampeners.

On the one hand, you could simply attach self-adhesive bumpers to the surfaces that come into contact when the cabinet doors slam shut. Those kinds of pads are even frequently included in packs of self-closing hinges, which we will discuss later on. In any case, the stick-on bumpers should take the sting out of a slamming door no matter what kind of hinges you have in place.

On the other hand, you could use a mechanical dampener that would catch the door before it shuts and close it softly. Those kinds of attachments usually reduce the sound of slamming doors even more than simple plastic bumpers. And, like the previous method we have mentioned, they should work with any type of hinge.

Lastly, you could also opt for lid stays, which are typically installed on cabinets that have flipper doors that swing out upwards. Essentially, the mechanical arm is supposed to slow down the descent of the door when it comes back down toward the cabinet box. However, the accessory would work just as well on regular cabinet doors.

The only problem with all of these solutions is that they require you to install an item in addition to the hinges your doors already have. Conversely, soft-close hinges would work like regular bearings while reducing noise.


The post The Best Soft-Close Cabinet Hinges for Kitchen or Bathroom Cupboards appeared first on Soundproof Living.

https://soundproofliving.com/best-soft-close-cabinet-hinges/feed/ 0
Quietest Through-the-Wall Air Conditioner: Best Quiet Units of 2021 https://soundproofliving.com/quietest-through-the-wall-air-conditioner/ https://soundproofliving.com/quietest-through-the-wall-air-conditioner/#respond Fri, 20 Aug 2021 22:31:43 +0000 https://soundproofliving.com/?p=10736 As temperatures soar over 95 degrees and your air conditioner struggles to keep you cool, you may find yourself wanting to end its misery. The …

Quietest Through-the-Wall Air Conditioner: Best Quiet Units of 2021 » Read More «

The post Quietest Through-the-Wall Air Conditioner: Best Quiet Units of 2021 appeared first on Soundproof Living.

As temperatures soar over 95 degrees and your air conditioner struggles to keep you cool, you may find yourself wanting to end its misery. The poor old thing has been making strange sounds for years now — it’ll probably be out of commission by next summer. So you might as well get the quietest through-the-wall air conditioner you can find as soon as the seasonal discounts start rolling out.

Relying on fans won’t be possible for much longer. But what exactly makes through-the-wall air conditioners a better option than window units or portable devices? Let’s answer that question to start with!

Searching for the best and quietest through-the-wall air conditioner.

The Benefits of Getting a Through-the-Wall Air Conditioner

If you’ve been trying to find the quietest through-the-wall air conditioner for your home, you should know that many of the products you’ll run into are actually window-mounted units. The difference in design usually comes down to the window ACs having ventilation grilles on the sides, whereas wall ACs have them in the back of the unit.

Notably, window-mounted units also tend to be louder than wall ACs. And, on top of all that, they permanently block your access to your window. Even portable air conditioners tend to take up windows with their exhaust pipe setup — albeit temporarily. So if you live in an apartment that doesn’t have many windows to spare, that can be a real deal-breaker.

So really, built-in wall units are much better long-term solutions. On top of that, they’re also energy-efficient, durable, and easy to replace if you already have a universal wall sleeve. As long as that unit can fit into the 24.5–27-inch wide hole in your wall, you’ll be all set.

Ultimately, the only drawback people experience with through-the-wall units is the initial installation. But once you break that ice — or rather wall — you’ll be in for a lifetime of chill summers.

A Guide to Buying the Quietest Through-the-Wall Air Conditioner

Having established the superiority of through-the-wall air conditioners, let’s talk about how you’re going to find the quietest one on the market.

Noise Level

First and foremost, let’s discuss the level of noise you might have to deal with. Typically, that depends on the cooling capacity of the unit — which we’ll soon discuss. The lower capacity units can achieve a volume of sound that’s well below 55 decibels. Since that’s close to the sound of mild rainfall, it shouldn’t get in the way of you living your life.

Even the more powerful units reviewed below don’t get much louder than 60 decibels. For comparison, that’s about the same as the volume you’d use to conduct a normal conversation. Before manufacturers started making an effort to produce quiet ACs, most people had to put up with 72–82-decibel units! That’s certainly not what you want from a device that’s supposed to run in the background all through the summer.

Btu and Room Capacity

Next up, you should really consider the cooling power you need from your wall AC. While shopping for the quietest through-the-wall unit on the market, you’ll see that most of them have a BTU number in their descriptions, if not the product names themselves. That can tell you how powerful a unit is, as well as the size of the space it can cool.

You see, BTU stands for British thermal unit, and it explains how many of those units your AC can process or remove within an hour. The higher that number is, the greater the square footage the device will be able to handle. So if you have a room in mind for your AC, start by measuring the floor.

Operating Modes and Settings

Most of the air conditioners on the market can cool and dehumidify your space. They usually have three fan speeds and three pre-set cooling modes to do that with. On top of that, some of them also have some amount of supplemental heating power that can help you boost the central heating in your building during the winter.

Many of the units you’ll see on the market also have Sleep Modes, which can adjust the operation of the device during the night to maintain the temperature you’ve selected. Additionally, you may have a Money Saving or Eco Mode that does something similar during the day. With that in mind, let’s get into the final feature you should consider before purchasing your AC.

Energy Efficiency

If you want to lower your electric bills, one way to do it would be to buy appliances that are energy efficient. In this case, that is represented by the EER — or energy efficiency ratio — of a unit. EER is essentially the ratio between the BTU of a unit and the power input or wattage necessary to run it.

A similar idea can also be expressed by the CEER or combined energy efficiency ratio. That number is calculated by measuring the BTU against the average energy input and standby power consumption in Watts.

For an AC unit to be energy efficient, you’d want it to have an EER above 10 or, ideally, 10.5. Anything below 10 isn’t enough for the unit to receive the coveted ENERGY STAR certificate.

The Best Quiet Through-the-Wall Air Conditioners (2021)

Now that we know the gist of shopping for the quietest through-the-wall air conditioners, let’s get into the reviews. The following products are listed in order of growing BTU. So if you’re looking to cool a bigger space, skip to the bottom of the list.

1. LG LT0816CER 8,000 BTU Wall Air Conditioner

This LG air conditioner has a cooling power of 8,000 BTU, which allows it to process an area of about 330–340 square feet. While the external section of the unit produces about 62 A-weighted decibels, the internal parts only produce 56 dBA. So both the interior and exterior noise levels will be in check with this device.

LG LT0816CER 8,000 BTU Wall Air Conditioner, 115V, White

Having said that, let’s go over some of the basic information about this unit, starting with its size and electrical ratings. The 65-pound unit is 14.04 inches tall, 24 inches wide, and 20.1 inches deep. According to the manufacturer, the AC should fit any standard 26-inch wall sleeve.

The device has 750 Watts of cooling power and runs on 115V of electricity. If the power ever cuts off and comes back again, the unit will continue working automatically. So if you want it, just make sure you have the correct kind of wall plug. And it’ll have to be no more than 72 inches away since that’s the cord length you’re getting with this product.

This AC has 4-way air deflection and three fan speed settings you can use on their own or in conjunction with the unit’s cooling or heating features. You’ll even be able to adjust the settings, including the timer, with the remote control that comes with the unit. After a certain point, the unit will turn on the Clean Filter indicator, signaling that it’s time to wash the filter.


  • 14.04 by 24 by 20.1 inches
  • 8,000 BTU cools up to 340 square feet
  • Produces up to 56 dBA
  • ENERGY STAR certified
  • Comes with a trim kit and remote control

2. Keystone KSTAT08-1HC 8,000 BTU Through-the-Wall Air Conditioner

While we’re on the subject of 8,000 BTU units, let’s talk about the first of three Keystone air conditioners we have on this list. Even though the brand seems to be overrepresented on the market right now, it seems like there’s a good reason for it. So let’s discover it together.

Keystone 8,000 BTU 115V Through-The-Wall Air Conditioner | 4,200 BTU Supplemental Heating | LCD Remote Control | Sleep Mode | 24H Timer | AC for Rooms up to 350 Sq. Ft. | KSTAT08-1HC

Measuring 14.5 inches tall, 24.2 inches wide, and 20.3 inches deep, this 76-pound unit should fit into a standard wall sleeve just as easily as the previous one. On top of that, it has the same 115V plug and is also capable of removing 2.1 pints of moisture from the air every hour. And since this unit has an internal evaporation system, the dehumidifier feature won’t cause leaks.

Ultimately, since these two units have the same BTU rating, it’s only natural to have these intersections. However, the other similarities are simply a result of these brands trying to be competitive. That’s why this unit is also capable of supplementing your heating needs during the winter. The manufacturer even specified that it has 4,200 BTU of heating power.

Additionally, this unit comes with a remote control that can detect where in the room you are and adjust the fan speed and temperature settings accordingly. You can also use it to delay the shutoff by as much as 24 hours. And when it’s time to clean the filter, removing it to vacuum or wash it will be a breeze.


  • 14.5 by 24.2 by 20.3 inches
  • 8,000 BTU cools up to 350 square feet
  • Produces up to 57 dBA (51.8 on low speed)
  • ENERGY STAR certified
  • Comes with a trim kit and remote control

3. Friedrich Uni-Fit Series UCT10A30A 9,800 BTU Cool Only Air Conditioner

Friedrich’s Uni-Fit series of air conditioners was designed to fit wall sleeves measuring between 24.5 and 27 inches. The 9,800 BTU unit is 14.5 inches tall, 24.2 inches wide, and 20.3 inches deep. So it has similar dimensions to the previous two air conditioners we’ve reviewed. However, unlike those two, this model has 940W of cooling power and no heating features. On top of that, this unit also removes as much as 1.25 pints of moisture from the air every hour.

Friedrich Uni-Fit Series UCT10A30A in Wall Air Conditioner, 9,800 BTU, 230v/208v, Energy Star

Since this unit has a higher BTU rating, it should be able to process an area between 400 and 450 square feet. While the manufacturer doesn’t mention the decibel level of this unit in the product description, it does claim to have included so-called QuietMaster Technology. Between the steel inner walls, high-density insulation foam padding, and vibration-dampening counterweights inside the unit, the appliance should be 25% quieter than the competitors’ products.

Another thing that’s unique to this line of products is that you can wirelessly control them through the Friedrich Go app. Alternatively, you can use the remote that comes with the unit.

The only thing you need to power this 230V air conditioner is a 250V-15A circuit breaker — or T-D fuse. Aside from that, you’ll just need to make sure that your power outlet is within 5 feet of the unit — since its cord is 4.75 feet long.


  • 14.5 by 24.2 by 20.3 inches
  • 9,800 BTU cools between 400 and 450 square feet
  • QuietMaster Technology
  • ENERGY STAR certified
  • Comes with a trim ring and remote control

4. Keystone KSTAT10-1C 10,000 BTU Through-the-Wall Air Conditioner

The second Keystone unit on this list continues our trend of presenting air conditioners in order of growing BTU ratings. The model offers 10,000 BTU capable of cooling up to 450 square feet. But in many other aspects, it’s pretty similar to the previous Keystone product we’ve reviewed.

Keystone 10,000 BTU 115V Through-The-Wall Air Conditioner | Energy Star | Follow Me LCD Remote Control | Dehumidifier | Sleep Mode | 24H Timer | AC for Rooms up to 450 Sq. Ft. | KSTAT10-1C

The 115V product can come with or without 10,600 BTU of supplemental heating power. We’ve chosen to feature the Cool Only version — which can also be made to suit a 230V outlet. All versions of the device come with an installation kit that includes foam seals that should let you retrofit your wall sleeve.

Overall, this model is fairly similar to the other Keystone product on our list in appearance as well as features. It has a 24-hour timer, three cooling modes, and three pre-programmed fan speeds allowing you to adjust the settings to your liking. Additionally, the ENERGY STAR-certified unit doubles as a dehumidifier capable of drawing up to 2.3 pints of moisture per hour.

When that becomes too much for the built-in filter inside the device, you’ll simply pop the front grille off and wash it. At peak performance, you’ll hear no more than 57.4 decibels from this air conditioner. Best of all, you’ll be able to control the unit with the same type of remote that comes with the other Keystone AC on our list. The company’s proprietary Follow Me technology allows the AC to track your movements around the room and adjust its operation mode accordingly.


  • 14.5 by 24.2 by 20.3 inches
  • 10,000 BTU cools up to 450 square feet
  • Produces up to 57.4 dB
  • ENERGY STAR certified
  • Comes with an installation kit and remote control

5. Whirlpool WHAT101-HAW 10,000 BTU Through-the-Wall AC With Supplemental Heating

If you like the idea of having a 230V air conditioner with 10,000 BTU cooling and 10,600 BTU of supplemental heating power, you might like this unit from Whirlpool. The company behind this product is famous for making silent household appliances like washing machines and dishwashers. So the fact that this AC unit only produces between 54 and 58 decibels during regular operation shouldn’t come as a surprise.

As expected, the unit has three speed settings and a number of operation modes. While it doesn’t have a Quiet Mode per se, it does come with a pre-programmed Sleep Mode. Moreover, it even has an automatic shutoff feature — though you can just as easily delay the shutoff by 24 hours by using the timer setting.

Like Friedrich’s Uni-Fit series of air conditioners, Whirlpool’s product is capable of sending cool air in eight directions. The 75-pound unit can cover between 300 and 500 square feet. Just keep in mind that it needs to be within 4 feet of an electrical outlet. Luckily, you won’t have to be that close to change the settings since the device does come with remote control.

The only downside of this unit is that it has an EER of 9.7. That’s certainly lower than the 10.7 average ratio of the other products on this list. Unfortunately, that also means that this air conditioner isn’t ENERGY STAR certified. However, it does have an Eco Mode that should save you some money in the long run.


  • 14.5 by 24.2 by 20.3 inches
  • 10,000 BTU cools 300–500 square feet
  • Produces up to 54 dB
  • Eco Mode should lower the electric bill
  • Comes with a trim kit and remote control

6. Keystone KSTAT12-1C 12,000 BTU Through-the-Wall Air Conditioner

The third and final Keystone unit on our list has a cooling power of 12,000 BTU capable of processing rooms of up to 550 square feet. The increased power also allows it to draw 2.5 pints of moisture from the air every hour. Moreover, like most of the units on this list, it also offers three fan speeds, three cooling modes, as well as a timer feature. It can even automatically shut down when it reaches a certain temperature.

Keystone 12,000 BTU 115V Through-The-Wall Air Conditioner | Energy Star | Follow Me LCD Remote Control | Dehumidifier | Sleep Mode | 24H Timer | AC for Rooms up to 550 Sq. Ft. | KSTAT12-1C

Even at a glance, you could probably tell that this unit has many things in common with other Keystone ACs. Still, we’ll go over its most significant features, starting with the amount of noise it’s capable of producing. Namely, even though this AC typically operates at about 56.5 decibels, it can go up to 60 decibels. But really, that shouldn’t overpower the sound of quiet conversation.

Unlike the previous product on this list, this model has an EER of 10.5 which was enough to earn it the ENERGY STAR certificate. It even has a washable filter that should reduce the ecological footprint of the model. The 115V unit has a 7-foot long power cord, which is something you ought to keep in mind.

Other than that, the only other thing you should know is that this model also comes with a remote. As we have established, Keystone’s Follow Me technology essentially allows the AC to adjust its operating mode according to the remote’s in the room.


  • 14.5 by 24.2 by 20.3 inches
  • 12,000 BTU cools up to 550 square feet
  • Produces up to 60 dB
  • ENERGY STAR certified
  • Comes with a trim kit and remote control

7. Emerson Quiet Kool 14,000 BTU Through-the-Wall Heat & Cool Combo Air Conditioner

Last but not least, we have a through-the-wall air conditioner with a cooling capacity of 14,000 BTU and 10,600 BTU of supplemental heating power. Suffice it to say, if you’re looking to bring the temperature down in a 700 square foot area, this unit should have you covered. Better still, it’ll work to dehumidify your space at a rate of 3.8 pints per hour. As long as it’s within 4.8 feet of a 230V power outlet, it should be fine.

Emerson Quiet Kool EATE14RD2T 230V 14K BTU Through The Wall Heat and Cool Combo Air Conditioner with Remote Control, EATH14RD2, 14000, White

On top of that, the device should fit any standard size wall sleeve — though of course that’s not included in the purchase. Instead, all you get is the washable and reusable filter, a trim kit, and remote control. The unit itself has all the standard features, including three fan speeds that work in conjunction with 8-directional louvers. Other than that, you can also adjust the 24-hour timer or engage the Sleep Mode.

Regrettably, with an EER of 9.4, this device is not ENERGY STAR certified. However, it does have an Energy Saver mode you can use to maintain a set room temperature.

Ultimately, the real selling point of this unit is its quiet operation. Naturally, the amount of power it requires prevents it from being able to hit the low 50-decibel range. But still, it should be no louder than 60 decibels.


  • 14.5 by 24.2 by 20.3 inches
  • 14,000 BTU cools up to 700 square feet
  • Produces between 57 and 60 dB
  • Energy Saver mode in lieu of an ENERGY STAR certificate
  • Comes with a trim kit and remote control

Choose and Install the Best Quiet Through-the-Wall Air Conditioner for Your Home

To find your way to the quietest through-the-wall air conditioner that suits your home, you’ll start by determining the voltage you need. As you have seen, these appliances have a voltage of 115 or 230. That means you’ll need to find out whether your power outlets are connected to a 120V or 240V system.

If you don’t have an existing wall sleeve, you might want to get an HVAC professional over to examine the thickness of your wall. They’ll be able to tell you what kind of sleeve you’ll need — and help you find the right AC for it. Of course, as we have seen, that’s pretty standardized at this point.

Even if you don’t need anyone to punch a hole through your wall, you’ll still benefit from the presence of an HVAC pro. Of course, in that case, the installation process might look something like this.

After removing the decorative edge around the AC, you’ll simply slide the existing unit out of the wall. There will be more steps involved when bringing the new unit in. You’ll have to work with the trim kit and adjust the ground wire too. But all those instructions should come with the device.

Enjoy a Soothing Cool Breeze Courtesy of Your Brand New Air Conditioner

There’s something about waking up on a bright August morning in a puddle of sweat that gets us wondering how we’re going to survive another humid summer in the city. Even if so far, we’ve made do with fans and portable air conditioners, we all know they won’t keep us cool for much longer.

So why not invest in a device that can give us the comfort we need? Through-the-wall conditioners are the way to go — especially if you already have a universal wall sleeve. Even if you don’t, it’s better to make one than to block a window with portable or window units.

If nothing else, wall units are typically much quieter than those alternatives. So you’re sure to find what you’re looking for. And once you do, you’ll be cool as a cucumber even in the midst of a heatwave.


The post Quietest Through-the-Wall Air Conditioner: Best Quiet Units of 2021 appeared first on Soundproof Living.

https://soundproofliving.com/quietest-through-the-wall-air-conditioner/feed/ 0
The Best Silent Clock Mechanism to Upgrade Your Loud Clocks With https://soundproofliving.com/silent-clock-mechanism/ https://soundproofliving.com/silent-clock-mechanism/#respond Sun, 20 Jun 2021 21:35:36 +0000 https://soundproofliving.com/?p=10661 Nowadays, there are plenty of interesting timepieces on the market. Unfortunately, the cheaper they are, the more likely it is that they’ll be insufferably noisy. …

The Best Silent Clock Mechanism to Upgrade Your Loud Clocks With » Read More «

The post The Best Silent Clock Mechanism to Upgrade Your Loud Clocks With appeared first on Soundproof Living.

Nowadays, there are plenty of interesting timepieces on the market. Unfortunately, the cheaper they are, the more likely it is that they’ll be insufferably noisy. Luckily, most of them have removable movement mechanisms in the back that you can easily swap out with a quieter model. With that in mind, I wanted to suggest some of the best silent clock movement mechanisms I’ve seen.

Now, most clock movement mechanisms come with accessories such as hanging hooks and clock hands. Depending on the design of the clock you’re looking to upgrade, those extra parts may influence your final product choice. On top of that, you’ll want to keep the thickness of the original clock in mind. That will certainly help you narrow down your options.

But before you learn more about choosing the right silent movement mechanism for your clock, let’s take a look at the best products on the market.

Best silent clock mechanism.

Best Silent Clock Movement Mechanisms (2021)

As you know, many clock movement mechanisms on the market come with a set of replacement clock hands. But in case you already have ones you can use, let’s start this list with a review of a plain movement mechanism box.

1. ULTNICE Battery-Operated Quartz Clock Mechanism Repair Parts

If you look at the movement mechanism that’s loudly ticking away in the back of your clock, you’ll see a box similar to this one. So how can you be sure that the product from ULTNICE is any quieter than the part you have?

Well, it all comes down to the electronic oscillator that powers the device, thanks to a quartz crystal. As such, the mechanism has an error rate of 1.5 seconds more or less per day. Additionally, this mechanism will move the clock hands smoothly without the unnecessary ticking sound.

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

Still, the 2.2-inch square box should easily fit onto the back of any clock. Its back side features an AA battery slot as well as an adjustment dial. Meanwhile, the front is flat with a half-inch long protruding shaft.

Notably, only 0.2 inches of that, or 5 millimeters, is threaded, so your clock will need to be thinner than that. According to the manufacturer, this device is suitable for clocks that are 4 mm or 0.15 inches thick at most. If yours is any thicker, you won’t be able to fit the metal hex nut onto the threaded section from the front.

Since this product doesn’t come with clock hands, the manufacturer has also included the diameter measurements of the shaft. The threaded area is about 0.29 inches or 7.6 mm across. Above it, you have the slightly slimmer shaft that will turn the hour hand, which has a diameter of 0.21 inches or 5.5 mm. Finally, the top section of the shaft measures 0.14 inches or 3.6 mm across.


  • Quartz movement mechanism box
  • 12 mm total shaft length
  • Fits clocks that are no more than 4 mm thick
  • Doesn’t come with clock hands

2. Sageme Clock Movement Mechanism Replacement With Hook

If the clock mechanism you want to replace has an incorporated hanging hook, a product like this one is a good option. The plastic case around the mechanism extends upward to form a triangular shape that will easily slip over a nail that’s waiting on the wall. As usual, the back of the box has a battery slot and an adjustment dial, while the front features a 12.5 mm or half-inch long shaft.

Clock Replacement Movement,Sageme Silent Sweep High Torque Clock Motor Movement Battery Operated Battery Clock DIY Parts Replacement Mechanism Shaft Length 12.5mm(1/2") ,Thread Length 5.5mm (7/32")

Crucially, the threaded part of the shaft is only 5.5 mm long, so less than half the total length. So if you want the mechanism to fit properly, your clock will need to be no thicker than 3 mm or 0.11 inches. After all, the product also comes with a plastic gasket that will go between the box and the back of the clock. Then, you’ll have to take into account the metal washer and hex nut that will secure the mechanism from the front.

The leftover part of the shaft will propel the three clock hands that come with the mechanism around the clock. The 2.9-inch hour hand is the most intricate of them, with the 3.7-inch minute hand being a close second in that regard. Lastly, you’ll have the slim 4.15-inch hand to secure the other two and mark the passing seconds.


  • High torque movement mechanism with an attached hanging hook
  • 12.5 mm total shaft length with a thread length of 5.5 inches
  • Comes with a set of three black clock hands
  • Also includes the washers and nuts you’ll need to install it

3. Mudder Silence Quartz Clock Movement Mechanism

If you like the look of plain, rectangular clock hands, you won’t find a better product than this clock movement replacement from Mudder. Just keep in mind that this specific product has a pretty long shaft, coming in at 31 mm or 1.22 inches. The threaded part itself is also 24.6 mm long, so it’ll fit a clock that’s around 0.90 inches thick.

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Black)

You’ll get two rectangular clock hands with the purchase. Depending on your preference, the thin aluminum parts can be black, silver, white, and red. In addition to the clock hands, the product also comes with a rubber gasket and a removable metal hanging hook. Moreover, you’ll get a washer, a hex nut, and a cap that goes over the minute hand.

Notably, some versions of the product — like the 23 mm one — include a slim, third hand. So if you need movement mechanisms that will be more suitable for thinner clock panels, look through the rest of the company’s lineup. You may even find that you prefer other styles of clock hands. For example, this 13.5 mm mechanism has more elegant, tapered clock hands in different metallic colors.


  • Quartz movement mechanism box
  • 31 mm total shaft length, 24.6 mm of thread
  • One set of rectangular clock hands
  • Comes in black, silver, white, and red

4. Stflybro 2 High-Torque Non-Ticking Clock Movement Mechanism Pieces With 4 Packs of Clock Hands

If you’re someone who appreciates variety, you might be interested in this pack of two clock movement mechanisms complete with four sets of clock hands. The mechanism boxes themselves both have the same measurements. The 2.2-inch squares are about two-thirds of an inch thick. They have the usual battery slot and control dial in the back and a protruding shaft in the front.

StFlyBro 2 Pieces High Torque Non Ticking Clock Movement Mechanism with 4 Pack Clock Hands, DIY Quartz Clock Motor Kit, Battery Operated Repair Parts Replacement, 7/10in (17.5mm)

In this case, the total length of the shaft is about 17.5 mm or 0.69 inches. However, the threaded part is 10.5 mm long so it should fit clocks that are under 0.4 inches thick. Both clock mechanisms come with plastic and brass washers and brass hex nuts. You’ll also get two removable hanging hooks and plastic wall nails.

As for the clock hands, between the four black sets, you’re sure to find one that fits your needs. The smallest set consists of three plain, straight hands ranging from 1.5 to 1.8 inches long. The second set contains an intricate hour hand that’s 2.67 inches long, and two 3.85-inch hands — a less detailed minute one and a plain, slim second one.

Next up, the third set is a basic spade style with a red second hand. Those clock hands measure from 3.14 to 4.33 inches. The last set only contains hour and minute hands, so the second hand is replaced with a cap nut.


  • Two non-ticking movement mechanisms
  • 17.5 mm total shaft length, 10.5 mm of thread
  • Includes four sets of clock hands
  • Also contains gaskets, washers, hex nuts, hanging hooks, and even plastic wall nails

5. Tikround Battery-Operated Clock Movement Mechanism With Replacement Parts

The TIKROUND silent movement mechanism is one of the best products for those who are looking for spade-shaped clock hands. In fact, the device comes with four sets of hands, as well as all the mounting hardware you’ll need to install it. Among those accessories, you’ll find a rubber gasket and a removable hanging hook for the back of the clock. For the front, you’ll have a metal washer and hex nut, and a piece that will secure the minute hand to the shaft.

Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

Speaking of which, the shaft measures 18 mm or 0.7 inches, though the threaded part is shorter at just under 0.2 inches. As established, that means that the clock itself can be no thicker than 0.15 inches or 4 mm.

Notably, the product listing also includes movement mechanisms with other shaft lengths. One would be suitable for clock panels that are between 9 and 13 mm or up to half an inch thick. Others would fit panels that are between 2 and 6 mm or 4 and 8 mm. So if you like the style of hands that comes with this product, you’ll find a good size for the clock you have here.

Going back to the clock hands, you’ll find that the four sets only contain hour and minute hands. The smallest ones are 2.16 inches and 2.75 inches long in total, while the longest ones measure 5.62 and 7.24 inches, respectively. You’ll find the measurements of the clock faces each set fits in the product description as well.


  • High torque Quartz movement mechanism box
  • 18 mm total shaft length, 5 mm of thread
  • Available in four other sizes
  • Comes with four sets of spade-shaped clock hands

6. HILLHOME Non-Ticking Pendulum Clock Movement Mechanism

Most of the products on this list should be suitable for any kind of wall clock. However, some people might need something even more special — like this pendulum clock movement mechanism from HILLHOME.

Non-Ticking Hands Quartz DIY Wall Pendulum Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands, 5/32 Inch Maximum Dial Thickness, 1/2 Inch Total Shaft Length

Like the other products in this category, this one is powered by a quartz crystal, which should make it accurate as well as silent. However, this clock movement mechanism also includes a pendulum swinger, making it ideal for upgrading older wall clocks. As a specialized product, the box of this mechanism is 2.2 inches wide and 3.3 inches tall — due to its pendulum attachment.

In the back of the box, the battery slot is vertical, rather than horizontal. Moreover, the adjustment dial is a bit less accessible, since it’s partially covered by the pendulum mechanism. On the front side, we have the standard 13 mm long shaft. However, since the threaded part is only 6 mm or a quarter of an inch long, this mechanism will only suit clocks that are no thicker than 0.15 inches.

On top of all that, the device comes with three sets of clock hands, as well as three plastic and brass washers, and three brass nuts. You’ll even get a cap nut you can use if you don’t need the second hand. Of the three clock hand sets you’ll get, two of them are black — one in the basic spade style and another more intricate design. The more intricate set also comes in gold, which you can use with the red second hand.


  • High torque Quartz movement mechanism box
  • 13 mm total shaft length, 6 mm of thread
  • Available in four other sizes
  • Comes with three sets of spade-shaped clock hands

Features to Look For When Shopping for the Best Silent Clock Mechanism

At this point, you’ll have noticed that most of the products you’ll find in this category run on quartz crystals. But what does that mean, exactly?

Traditionally, mass-produced analog clocks were either propelled by an electric motor or an electromagnet which were, in turn, powered by batteries. The devices we’re talking about are famous for producing loud ticking sounds to this day. However, Quartz movement mechanisms mostly rely on electromagnetic oscillations to move the clock hands.

Unlike typical motor-powered timepieces, Quartz clocks make the hands move smoothly, eliminating the choppy, ticking noise. On top of that, they’re also more accurate timekeepers. The only better option would be to get yourself an atomic clock — which you probably don’t need.

With that being said, it’s easy to see why people who value accuracy and silence prefer quartz-powered devices. Now, let’s see what you should keep in mind while shopping for your own quiet clock mechanism.

The Movement Shaft Length

If you’ve paid attention to the design of most movement mechanisms, you’ll understand that the thickness of the protruding shaft on one side of the box is the key factor you’ll need to consider when buying the part. You’ll want to keep two measurements in mind:

  • The length of the threaded part of the shaft
  • The total length of the shaft

Before you order your replacement clock movement mechanism, take the time to measure your clock. It shouldn’t be thicker than the length of the threaded part of the shaft. After all, some of that metal needs to show on the front side of the clock once you push the shaft through. You’ll need to be able to fit a rubber gasket between the mechanism box and the clock, and a washer and hex nut between the clock and the hour hand.

Moreover, if you’re going to be reusing your old clock hands and swapping out the movement mechanism box, you’ll have to take into account the diameter of the shaft. You’ll note that it has two diameters since the parts are supposed to move separate clock hands. Namely, the thicker part is for the hour hand while the narrower, upper part should fit through the minute hand — leaving the second hand to top off the structure.

Needless to say, if you’re buying only the mechanism box without a corresponding set of clock hands, you’ll want to make sure that the shaft will fit through the ones you have.

Design of the Clock Hands

If you’re looking for a silent movement mechanism that comes with clock hands as well, there are plenty of different styles to choose from. Hour and minute hands can be tapered, blunt, or more intricate spade designs.

Depending on the appearance of the clock face and the numerals on it, you might find one of those styles more appropriate than others. On top of that, the diameter of the clock face will also determine the size of the hands you need.

Naturally, the second hands are usually longer than the hour and minute hands. They also tend to be simpler in design, though many are colored differently to make up the difference.

Of course, all three hands can come in a variety of colors. However, black, white, silver, gold, and red sets are the most common ones you’ll run into.

Wall Hook

If you don’t have a specific clock in mind when shopping for replacement movement mechanism parts, you’ll have to account for ones that don’t have a separate wall mount in the back. Luckily, some devices come with a removable hook part that fits over the shaft and sticks up above the box.

Of course, those kinds of products also come in handy when you’re working on clocks that have built-in wall mounts. After all, they allow you to choose if you want to include the hook piece or not.

Still, if the clock itself doesn’t have a hook on it, you’ll want to get a movement mechanism that does. In that case, you can just get one with a built-in hook that’s made of the same black plastic as the rest of the mechanism.

How to Install a Silent Clock Mechanism

When you decide to install your new silent clock mechanism, you’ll find the process quite simple. First, you’ll need to disassemble the clock you’re working on, or rather prepare a clock face of your own design.

At this point, you should be sure that the shaft on the device you got will fit the clock. It should slide through the hole in the middle of the clock easily, leaving a section of the threaded part visible above the line.

Of course, before you push the shaft through, you’ll want to put the removable metal hanger through it, if necessary. If not, you can just put the rubber or plastic gasket between the back of the clock and the mechanism.

Once you have the clock in place, you’ll put the brass washer over the threaded bit that’s peeking through, and top that off with the hexagonal nut.

Lastly, start stacking the hour, minute, and second hands one on top of the other. If your clock has a frame or a glass cover — now is the time to reinstall it. If not, you can simply hang it on the wall and admire your work.

Alternatively: Get a Clock That Already Has a Silent Clock Mechanism

If you’ve spent any time at all fiddling with modern clocks, you’ll know that the process of replacing a movement mechanism is a bit fussy. Those thin, aluminum clock hands are quick to bend under any amount of pressure. So if you don’t install them correctly, they could start making noise as they scrape over each other.

With that in mind, I wanted to suggest a simpler alternative. Just buy a new clock. Some of those non-ticking analog timepieces can even double as alarm clocks. And if it’s money you’re worried about, you won’t find the movement mechanism that much cheaper than the whole clock.

Of course, if you happen to like fixing up old, noisy clocks — the products above should get you started on the right path.

The post The Best Silent Clock Mechanism to Upgrade Your Loud Clocks With appeared first on Soundproof Living.

https://soundproofliving.com/silent-clock-mechanism/feed/ 0
Best Quiet Dishwashers of 2021: Suggestions & Reviews https://soundproofliving.com/quiet-dishwasher/ https://soundproofliving.com/quiet-dishwasher/#respond Thu, 27 May 2021 10:59:02 +0000 https://soundproofliving.com/?p=10558 Kitchen appliances are some of the noisiest devices in our homes. Luckily, many of those appliances have quiet counterparts — but what about the noisiest …

Best Quiet Dishwashers of 2021: Suggestions & Reviews » Read More «

The post Best Quiet Dishwashers of 2021: Suggestions & Reviews appeared first on Soundproof Living.

Kitchen appliances are some of the noisiest devices in our homes. Luckily, many of those appliances have quiet counterparts — but what about the noisiest one among them? Today, we’re on the hunt for the best quiet dishwashers on the market.

In the grand scheme of things, most dishwashers produce an unreasonable amount of noise. Even if you get a quiet model, you’ll likely still have to put up with some sound leakage. However, it’ll certainly be better than dealing with a regular dishwasher that doesn’t have any features that enable quiet performance. With that in mind, let’s establish a baseline: how loud are dishwashers normally?

Searching for the best quiet dishwasher on the market.

What Is the Decibel Level of a Quiet Dishwasher?

Companies that pride themselves on quiet products will often include a decibel measurement in their product descriptions. So what’s the number you want to see in a quiet dishwasher? To make a long answer short, anything below 40 decibels should do it. However, things aren’t always as simple as that.

To understand how to approach decibel level ratings, you’ll need to know how loud certain sounds are on this scale. Let’s take vacuum cleaners as an example — normally, these devices produce about 80 decibels of noise. That’s about the same volume of sound we might hear coming from some lawnmowers. Needless to say, constant exposure to that level of noise can cause lasting hearing damage.

Luckily, most commercial dishwashers don’t come anywhere near that mark. Most of them only make 60 decibels of sound. But even if yours is closer to 70 decibels, that would make it two times quieter than the average vacuum cleaner. After all, an increase of ten decibels doubles the volume of sound in our perception.

Notably, many companies use dBA (A-weighted decibels) levels rather than regular decibels (dB). A-weighted decibels are units that take into account the way we experience sound. So seeing a dBA level rating should make it easier to compare how loud the dishwasher is to other appliances you’re used to hearing.

Some Disclaimers

At this point, you’d think that you’d be able to find the quietest dishwasher on the market without further assistance. But here’s why you may be wrong. Basically, you need to consider the question of who is testing these noise levels and how.

At this point, there’s no official method of measuring the volume of sound these products make. What’s more, most companies do their own testing, so there’s no shortage of inconsistencies. Even though many include decibel levels in product descriptions, they don’t always state the distance between the sound level meter and the appliance.

A loud dishwasher would sound quieter if we measured the volume of noise from a few yards away as opposed to a foot away. Therefore, two machines that have the same decibel level on paper might perform differently in person.

Additionally, many of the odd sounds you might hear coming from your dishwasher aren’t caused by the design of the machine. If you happen to hear repetitive thumping or grinding noises, user errors and plumbing issues will be the more likely culprits. But don’t worry, we’ll talk about how you can avoid those pitfalls later on.

5 Best Quiet Dishwashers

Now that you know what to expect out of a quiet dishwasher, let’s see some examples. The products I’ve found mostly come from established and trustworthy manufacturers. No matter which machine you chose, you’ll get the quality build and quiet performance you’re looking for. So feel free to take your pick based on the dimensions and special features I’m about to describe.

1. Whirlpool WDF550SAHS With Quiet Partner Sound Package

Even though Whirlpool makes plenty of dishwashers that are quieter and more complicated than this one, I wanted to start this list off with a simpler option. The WDF550SAHS model will take up 24 inches of floor space, sliding comfortably under your countertop — as long as it doesn’t fall below 32.5 inches.

Both the interior and the exterior of the machine are made of stainless steel, which should muffle the sound of running water. You can expect this dishwasher to be about as loud as a moderate rainfall with a volume of about 51 dBA.

The only part of the door that isn’t made of stainless steel is the control panel, which has a glass overlay. Thankfully, the settings above the handle are all fairly standard despite their futuristic design. You’ll have access to several wash programs, as well as drying and delay cycle options.

Interestingly, the appliance will also remember whichever settings you use thanks to the cycle memory feature. Its internal sensors will also suggest which settings you should use. Speaking of the internal structure, you’ll be able to adjust it by manually shifting the top rack. What’s more, you’ll also find a removable silverware basket on the bottom rack.


  • A 32.5 inches tall built-in model with a 24-inch base
  • Stainless steel interior and exterior
  • Sensor cycle and memory features
  • 51 decibels

2. Maytag QuietSeries MDB8959SKZ

Due to the lack of a visible control panel, some might find the next few dishwasher models on this list a bit disconcerting. But they are the future! The fingerprint-resistant stainless steel exterior of this model is disrupted only by a recessed plastic-coated handle. When you open the door, you’ll find all the settings along the top edge.

This particular Maytag appliance is famous for the integration of the company’s Dual Power Filtration technology. Namely, rather than pre-washing your dishes, the machine combines microfiltration with a stainless steel chopper to eliminate any remnants of food. Between that and the PowerBlast cycle option, as well as the Steam Sanitizing feature, your dishes are bound to come out looking brand new.

There are five wash cycles in total as well as several other options to choose from, including delay and drying programs. Even if you let the appliance run an automatic program, the built-in sensors will adjust the temperature as needed. The machine also has leak detection preventing it from working if there is excess water on the ground below it.

The stainless steel interior of the appliance has two main racks as usual. However, instead of the traditional silverware basket, this unit has another rack near the top that’s just for cutlery.


  • A 33.5 inches tall built-in model with a 24-inch square base
  • Stainless steel interior, partially plastic exterior
  • PowerBlack cycle and Dual Power Filtration
  • 47 decibels

3. Bosch 800 Series SHPM98W75N

This Bosch 800 Series model only produces about 40 decibels of noise during operation — but that’s not even its most interesting feature. Instead, that honor goes to its CrystalDry technology. Namely, the appliance uses zeolite to hasten the drying time of its contents, including plastics that are generally difficult to dry. Moreover, the mineral also helps the stainless steel interior of the machine remain spotless.

Speaking of the interior, you’ll find several adjustable and removable racks inside. The top rack can be moved if you need to put taller items on the lower one. There’s also a third rack for silverware that’s deep enough to store ladles as well.

Overall, the machine is a fairly standard built-in model, coming in at just below 34 inches. It should fit into a 24-inch square slot. The front side has a smooth design with only a recessed door handle near the top. Once again, the control panel is stashed along the top side of the door.

If you’re dealing with items that need to be extra clean — like baby bottles, the sanitize option will increase the temperature of the final rinse in an effort to eliminate bacteria. There’s also a half load setting, a delayed wash cycle feature, and several other functions you can try.

When you’re done making the selections, simply close the door and let the machine do its thing. A red light will be projected onto the floor in front of the appliance while the wash cycle is running. So the impressively quiet performance won’t affect your ability to gauge when your load is done.


  • A 34 inches tall built-in model with a 24-inch base
  • Stainless steel interior and exterior
  • CrystalDry feature
  • 40 decibels

4. Samsung DW80E9950UT

Samsung’s DW80E9950UT dishwasher is yet another whisper-quiet model with an attractive, clean design. Once again, you have a recessed handle with controls hidden along the top side of the door. However, this model also lets you see the remaining time on the wash cycle clock on the front display.

The only part of the unit that will be visible once you install it under your counter is the door, so the sleek design is really important. The exterior metal comes in three colors — the standard grey, black, and a brownish “Tuscan” shade. So you’ll be able to match your appliance to your kitchen counters! Best of all, the finish of the steel is fingerprint-resistant so you won’t have to clean it too often.

The inside of the machine is also made of stainless steel, which helps it operate at a quiet 39 dBA. Instead of having rotating spray arms, this dishwasher uses AquaBlast jets, Samsung’s linear wash system that ensures full corner coverage. Like the previous model, this one has three racks — the top one is reserved for silverware. The door of the machine will open automatically when the wash cycle is done, but you’ll also be able to monitor its progress and even adjust the settings from your phone.

There are seven wash programs in total, including the self-cleaning option. On top of that, you can also engage the zone or speed boosting settings, delay the start of a wash cycle, or finish with a sanitizing rinse.


  • A 34 inches tall built-in model with a 24-inch square base
  • Stainless steel interior and exterior
  • Wi-Fi connectivity
  • 39 decibels

5. Magic Chef Countertop Portable Dishwasher

Lastly, I wanted to mention a dishwasher you could use even if you don’t have room to spare. The 6-place setting countertop model from Magic Chef is just about 22 inches wide, 17 inches tall, and 20 inches deep. Weighing in at around 45 pounds, most kitchen cabinets should be able to support it. The unit is incredibly easy to install even without the help of a professional.

The controls at the top of the door might take some getting used to, though, since they’re only represented by symbols. Still, you’ll figure them out with the help of the manual. And once you run your first cycle, you’ll be shocked at how quiet this model is!

Despite the seemingly diminutive size of the appliance, you’ll have plenty of space for all sorts of dishes and glasses in the spacious stainless steel tub. There are only one rack and spinning spray arm, so you won’t be able to adjust much about the interior. Even so, you’ll still have a removable silverware basket, at least, so if you ever want to wash a larger pot, you can just remove that.


  • A 17 inches tall, 22 inches wide, 20 inches deep countertop model
  • Stainless steel interior, plastic exterior
  • Easy self-installation
  • 52 decibels

Features to Look For When Shopping for Quiet Dishwashers

Since we’ve already discussed the decibel levels you should be looking for, let’s talk about some of the other features your new dishwasher should have. First, you should think about how the new appliance will fit into your kitchen.

Built-in or Stand-Alone Model

When looking for a dishwasher of a standard size, you’ll find that most models fall into one of two categories. Some are meant to be installed under your kitchen counter, surrounded by cabinets, while others are freestanding. If you’re looking to save space, you could get a compact or even countertop model.

As you might have noticed, the difference in these types of dishwashers is in their dimensions. Narrower built-in units usually have a 24-inch square base. However, if you need a greater internal capacity, you’ll want to look for dishwashers that are 30–42 inches wide instead.

On the other hand, if you have a smaller kitchen, compact dishwashers only take up 18 by 22–25 inches of floor space. The height of these appliances usually matches that of other dishwashers, at 35 inches tall. However, if you don’t have any space on your kitchen floor, you could get a countertop unit. Those are usually between 16 and 22 inches high and wide.

Internal Specifications

Obviously, the external dimensions of a dishwasher will be an important factor in your final decision. But remember, the appliance will be significantly smaller on the inside. That’s why you’ll need to consider internal specifications as well as external dimensions when choosing your dishwasher.

Most importantly, the size of your machine also determines its internal capacity. Generally, that is represented by the number of items you could place on the racks inside the machine. For example, while a wide or full-sized model might fit up to 150 items, a narrow one would only fit up to a hundred. Depending on the types of things you’re loading, you could fit between 40 and 60 items into a compact appliance.

But of course, the capacity of a dishwasher isn’t the only internal spec you should keep in mind. The amount of flexibility you’ll get from things like removable silverware baskets and racks is another important factor. These are things most people don’t really think about when they’re shopping but are always grateful for later on.

Lastly, if you’re looking for a quiet dishwasher, limit yourself to models with stainless steel tubs. Sure, machines with plastic interiors are cheaper while still being durable and easy to clean. However, stainless steel is notably better at muffling the sound of running water than plastic. As a bonus, the material is also odor- and stain-resistant.

Control and Wash Options

If you’re buying a new appliance, you want to be able to use it. So when choosing your new dishwasher, try to get one that has controls and settings you recognize. With that in mind, let’s talk about the most common settings you might find.

Firstly, you might want to think about the placement of the control panel. Some dishwashers have the controls on the front while others have them on top. There are even some models that have controls hidden under recessed door handles.

When it comes to washing cycles, you’ll find that things are pretty standard across the board. Most dishwashers will let you delay the start time of the cycle, as well as initiate a rinse cycle without washing the load outright. Additionally, you’ll be able to choose between several wash programs including a quick mode and a sanitizing option.

Some models also have a steam clean feature and bottle jets that target certain areas of the rack. Usually, though, machines will only have one kind of water movement. Traditional dishwashers have a rotary spray, but some of the newer models use linear washing or high-pressure jets to clean the contents.

Depending on the manufacturer, your appliance may also have a built-in water heater and softener. These features often go hand in hand with various water and temperature sensors that are now built into the dishwashers. If you want to be fancy about it, you could get a smart dishwasher, which would allow you to use those sensors to save water and energy.

How to Make the Dishwasher You Have Quieter

As I have briefly mentioned before, even the quietest dishwashers may produce noise in the right — or rather, wrong — circumstances. Usually, those sounds are the result of user error or plumbing issues. Having one loosened valve could make your dishwasher produce noise even when it’s off! So how can you keep your new appliance running smoothly and quietly?

Load It Properly

Loading your dishwasher properly is the most important thing you can do to ensure a quiet wash cycle. Simply put all your plates, mugs, and cutlery in the correct slots on the racks. When you’re done loading the dishwasher, make sure the arms inside can rotate freely without bumping into anything.

Taking the time to put everything in its place will make it less likely that anything will get dislodged during the wash cycle. If nothing else, it’ll prevent the spinning spray arms from hitting and potentially chipping plates that are sticking out. That alone is responsible for the majority of the noise people tend to hear coming from their dishwashers.

Insulate the Dishwasher

Built-in dishwashers are usually installed with a thin layer of insulation covering four sides of the machine. However, that material isn’t as effective as you need it to be. Installing more substantial dishwasher insulation should muffle the noise and prevent the machine from vibrating against the surrounding kitchen cabinets.

Luckily, I’ve already talked about the best products you can use to replace that insulation in a previous article. The installation process may be a bit tricky but most people should be able to manage it. Still, if you don’t want to mess with electricity and plumbing alone, you could leave this step to the professionals.

Cover the Front Side

If the internal walls of your dishwashers are plastic, you may still hear sounds coming through the door of the appliance. If you really want to muffle that noise as well, I recommend covering the front of the machine. There are several ways to go about doing that:

  • Close off the dishwasher with a wooden panel or door (making sure you can still get the machine out if you need to)
  • Trimming a soundproof blanket to fit perfectly over the machine and attaching it with a hook and loop tape
  • Using a small curtain panel (you could sew a large pocket on the back side if you want to thicken the cover with a sheet of MLV)

In fact, if you don’t want to bother getting blanket insulation, you could just wrap soundproof blankets around your appliance and call it a day. Either way, at this point, five of your six sides should be padded.

Put in Anti-Vibration Pads

Thick dishwasher insulation is great for stopping the transfer of vibrations to the surrounding cabinets. However, your appliance will still be able to shake the ground. Some machines even manage to march clear across the floor (though most are screwed into place to prevent that). In any case, you could reduce unwanted impact noise by putting anti-vibration pads under the feet of the appliance.

If you’re going to replace the insulation around the dishwasher, you could use the opportunity to put in your anti-vibration pads. Before you slide the machine back into place, put two rubber pads into the dishwasher slot. Roll or slide the machine back, making sure that the wheels or back feet end up on the pads you’ve set up. The front feet will probably be lifted so you could slide two more pads in before lowering them.

Soundproof the Kitchen

If you don’t want to bother extracting your built-in machine or adding on layers of insulation to it, you could always just soundproof the kitchen. Of course, that would only work if you didn’t live in an open-plan space. Still, if the room has doors, it should be able to keep any sounds coming from your dishwasher from bothering the rest of the household.

Making the Most Of Your Quiet Dishwasher

Now that you have a quiet dishwasher, you won’t have to limit yourself to scheduling wash cycles when you’re away from home or sleeping. Even if you don’t implement the soundproofing tips I’ve mentioned above, you’ll hardly be able to hear it! But once you eliminate the noisiest kitchen appliance, the ones you used to consider quiet will probably become louder to your ears.

So let this be the beginning of your quest to replace all your kitchen tools with quieter models. Fortunately, even the loudest appliances, like coffee grinders, have silent counterparts. And the same goes for things like electric kettles and microwave ovens. After replacing all those loud and outdated appliances, you’ll love spending time in your kitchen!

The post Best Quiet Dishwashers of 2021: Suggestions & Reviews appeared first on Soundproof Living.

https://soundproofliving.com/quiet-dishwasher/feed/ 0
How to Sleep With Headphones Without Choking Yourself Out https://soundproofliving.com/sleeping-with-headphones-on/ https://soundproofliving.com/sleeping-with-headphones-on/#respond Wed, 18 Nov 2020 23:33:30 +0000 http://soundproofliving.com/?p=9819 Good naps are hard to come by, so if you find something that lulls you to sleep in just the right way, you should hang …

How to Sleep With Headphones Without Choking Yourself Out » Read More «

The post How to Sleep With Headphones Without Choking Yourself Out appeared first on Soundproof Living.

Good naps are hard to come by, so if you find something that lulls you to sleep in just the right way, you should hang on to it. But what if your favorite method of falling asleep clashes with your sleeping arrangements? What if you share your room or your bed with a light sleeper, but you need some kind of noise to doze off? Well, in that case, you’d best get used to sleeping with headphones on — and I’m about to show you how.

Most people who have never tried to fall asleep with headphones on have two major concerns. Namely, they worry about perishing in their sleep due to electrocution or choking. So let’s dispel some of the myths that keep so many folks from catching z’s in style.

Sleeping with headphones on: How to do it the safe way-

Is It Safe to Sleep With Headphones?

Before I tell you how to wear headphones in bed without developing a crick in your neck, let’s see the most worrying potential dangers of sleeping with headphones on:

Choking Hazard

If you wear wired headphones to bed, you might wake up in a tangle of cords. Even worse, according to some people, you might not wake up at all. But frankly, the chances of getting strangled in your sleep are pretty slim, especially if the cord in question is thin.

On the other hand, if the cord is on the thicker side and you tend to toss and turn while you sleep, it might happen. Fortunately, getting around this potential obstacle is fairly easy — just get a wireless headset.


The second most common fear people have about sleeping with headphones on is that they might get zapped by an errant electric current. Fortunately, the chances of that happening are also close to zero.

Sure, if your headphones are connected to a device that is, in turn, plugged into an electrical socket, there is a possibility of a surge getting to your headphones. But even then, they’d have to be structurally compromised enough for you to get in direct contact with the wiring. You can probably see how unlikely that scenario is for yourself.

Ultimately, electrocution and choking aren’t concerns you’ll need to worry about if you go wireless. However, some people still worry about Bluetooth technology giving them cancer. We might as well debunk that myth — Bluetooth devices emit harmless levels of radiation. So that’s certainly not a concern you need to add to your list.

Hearing Damage

Having seen two unlikely dangerous situations you might get into if you wear headphones in bed, let’s discuss some more pressing concerns. Instead of choking or electrocution, you should be worried about damaging your hearing. After all, when we’re trying to block out external sounds with audio devices, we tend to be a bit heavy-handed with the volume keys.

But the potential danger is two-fold. The issue of hearing loss due to loud sounds can be fixed by simply dialing the volume down. However, depending on the kind of headphones you’re using, you may also suffer from:

  • Earwax accumulation due to the lack of ventilation. All kinds of headphones could induce this problem, and it could be severe enough to cause other issues as well. More to the point, there would be waxy residue on your headphones, which would be medically irrelevant but visually gross.
  • Otitis externa, which is inflammation of the external ear canal. The condition is common in swimmers and people who prefer earbuds. Earplugs and earbuds irritate the inside of the ear, which causes painful swelling.
  • Necrosis or tissue degradation due to a bad fit of the earbuds. Uncomfortable in-ear headphones could be pressing against the inside of your ears in such a way that the extra pressure may be deadening the skin. However, you’d have to put up with a lot of pain before it got to this stage.

If you notice earwax buildup and tenderness and let the symptoms go untreated, you may end up with permanent damage. Any discomfort you experience will go away if you transition to on- or over-head headphones. Alternatively, you could implement the tips I’ll share below. As for wax accumulation, that’s an issue you’ll have to take up with an otolaryngologist.

Lack of Environmental Awareness

Lastly, before sleeping with headphones on, you ought to consider the fact that they decrease your awareness of the world around you.

Even if you’re not a particularly light sleeper, some sounds would still be able to break through to you if you weren’t wearing headphones. Namely, you have to be able to hear your morning alarm, fire alarms, and tornado sirens at all times. Additionally, not wearing headphones would allow you to hear your kids during the night or any other sounds that might arouse suspicion.

Unfortunately, that goes out the window if your ears are blocked. Still, if the person sleeping next to you is a light sleeper, they’ll catch any noise you don’t. So this could be a non-issue — just let them worry about would-be burglars!

Can Your Headphones Break if You Sleep on Them?

Believe it or not, most people aren’t particularly worried about the potential health risks of sleeping with headphones on. However, they’d rather avoid having to buy a new pair of headphones if the ones they use break during the night. But how seriously should you take this concern?

Once again, some kinds of headphones are more likely to break while you sleep than others. Generally, those issues only come up if you’re using wired headphones. All that tossing and turning won’t just make you dream of being garrotted — it may also cause the cord to snap. Since that would leave the wires exposed, you probably don’t want to risk it.

As you might have noticed, many of the problems I’ve highlighted so far could be solved by simply choosing wireless headphones. However, even if you went wireless, you might regret sleeping with headphones on. Depending on their design, the experience may be less than comfortable and have incredibly painful consequences.

Tips for sleeping with headphones on.

Tips for Sleeping With Headphones On

So far, I’ve focused on everything that could go wrong if you went to sleep with headphones on. But you may be interested to know that it doesn’t have to be like that! There are small adjustments you can make to avoid any discomfort and risk.

1. Go Wireless

Let’s get the most obvious tip out of the way first. If possible, go for wireless headphones. Most of them should be able to get you at least five hours of playtime, and you’d avoid the choking hazard. Additionally, wireless headphones will be less likely to break while you sleep.

Of course, that’s by no means a guarantee. Some headphones, wireless or not, are shoddily built — there’s no way around that. Furthermore, even if yours are a quality pair, they may not have been made with sleeping in mind. So before you blindly choose a random pair of wireless headphones, make sure that you’ll find them comfortable to use while horizontal.

2. Find the Most Comfortable Headphones for You

There are three kinds of headphones you’ll get to choose from. Earbuds provide excellent passive noise insulation, but they may be uncomfortable to use while sleeping. Over-ear models are usually way too chunky to sleep comfortably on, but they provide excellent audio reproduction. Then, there’s the question of on-ear headphones.

No one in their right mind would recommend on-ear headphones if you need to be able to block out noise. Unlike over- and in-ear models, which completely close off the ear, on-ear headphones provide next to no passive insulation. So even if they have active noise cancelation, the feature won’t work because the design of the product will still let noise seep in. That certainly won’t do if you’re trying to block out traffic or persistent snoring.

Still, on-ear headphones may be the most comfortable kinds of headphones to sleep on. So in this case, lower quality insulation and audio might be a compromise you’d be willing to live with. Besides, if you manage to fall asleep more easily with headphones, you won’t have to put up with the audio quality for long.

3. Use Headphones for Sleeping

If you have a choice, always go for the headphones that are designed for sleeping on. Uncomfortable earbuds or chunky over-ear headphones may cut it while you’re in the upright position. But when you start struggling to make yourself comfortable in bed, you’ll see the value of flat headphones.

Most of the sleep and travel models are simple disc-shaped speakers fitted inside wide headbands. Even though most of those headphones would technically be considered on-ear devices, that headband will go a long way toward muffling any leaking noise.

CozyPhones Over The Ear Headband Headphones - Sleep Headphones - New...
  • HEADBAND EARPHONES: Lightweight, comfortable...
  • MADE TO LAST: Featuring a flexible and...

Aside from those kinds of products, you could also use low-profile earbuds for this purpose. Unlike regular earbuds, these wouldn’t go as deeply into your ear canal, and would therefore be comfortable even for side sleepers. However, if you’re going to snooze with headphones on, sleeping on your back would still be your best bet.

4. Sleep on Your Back

Sleeping on your back is good for your spine, it reduces headaches, and even prevents wrinkles. And now, we can add another point to that list of benefits. It’ll also save your ears from the additional pressure your headphones might exert on them.

Of course, different people naturally prefer different sleeping positions. That’s not something you can force —  or is it? According to Internet wisdom, you can always transition to sleeping on your back by:

  • Getting the right mattress and pillow for it. When shopping, look for supportive mattresses and pillows that are on the firmer side. If you get a pillow with a curve in it, it’ll be more difficult to get comfortable sleeping in any position other than on your back.
  • Putting a leg elevation pillow or a rolled-up blanket under your knees. Slightly bending your legs at the knees will flatten out your back and make the experience of sleeping in that position much more pleasant. Additionally, it’ll prevent you from rolling to the side or sleeping on your stomach.
  • Building barriers on both sides of your body. Putting pillows under your shoulders and waist will prevent you from turning over. You’d only have to keep the additional support there until you get used to sleeping on your back. Just think of the pillows as training wheels!

If knowing how easy it is to train yourself to sleep on your back isn’t a good enough incentive to actually do it, will it help to know that other sleeping positions are bad for you? Even though sleeping on your stomach can decrease snoring, keeping your head turned to the side may hurt your neck. What’s more, the position can add pressure to your stomach and worsen back pain.

But what about sleeping on your side?

5. Use a Pillow With a Hole

Sleeping on your side probably won’t cause any health problems as long as you keep your spine aligned by placing a pillow between your knees. But if you’re planning on wearing chunky headphones while sleeping in this position, you might want to consider buying a pillow with a hole.

After all, applying pressure to the side of your head while wearing most kinds of headphones is a pretty bad idea. It would hurt — a lot — unless you were using a flat, on-ear model that’s specifically made for sleep. Otherwise, you should use a pillow that would relieve the pressure from your ears.

PureComfort - Pillow with an Ear Hole | Ear Pain & CNH Pillow |...
  • PROMOTE PROPER ALIGNMENT: Our unique side...
  • COOL, SOFT , & VERSATILE: Our proprietary...

Fortunately, several products fit the bill. Just look for pillows with an ear hole — most of them will provide the ear pain relief you want. The holes in question are usually right in the middle of the pillow, measuring only a few inches across. So you’ll have neck support and a convenient pocket to lower your headphones into.

6. Get a Travel Pillow (and Other DIY Methods)

If you already have a travel pillow, that might be a great temporary solution for sleeping on your side with headphones on. You could either use it on its own or put it over your pillow if the combined height of the two pillows doesn’t make it uncomfortable.

Once you have the pillow where you want it, you can drop your ear into what would otherwise be the neck hole. Alternatively, if you don’t even have a travel pillow, you may be able to maneuver the pillow stuffing to the sides of the pillowcase to make a hole in the pillow. But that would only work if your pillow isn’t made of memory foam, which has become increasingly unlikely.

And if you do have a memory foam pillow, you could alleviate the pressure from the ear you’re sleeping on by creating a donut shape with a towel. That should elevate your head and create the hole your ear is going to need.

What You Can Listen To

Now that you’re in bed with your headphones on, there’s only one question left to answer. What should you listen to? Trust me, your regular playlist may not do the trick. After all, it’s probably full of pump-up songs — and that’s certainly not what you want to listen to around bedtime.

Instead, if you even want to stick with music, you should opt for more soothing and meditative tracks. According to some studies, classical music has had beneficial effects on patients suffering from PTSD and insomnia. But you don’t have to listen to Chopin and Beethoven if they’re not your cup of tea. There are plenty of sleep-inducing playlists on your favorite digital music services if you care to look for them.

Alternatively, you may prefer to fall asleep to the sound of someone’s voice. In the age of podcasts, you’ll easily find what you’re looking for. But if you’re usually jittery at night, I suggest that you leave listening to true crime podcasts to your morning self.

Instead, you could listen to Sleep With Me or Game of Drones, two podcasts I’ve previously recommended, or Nothing Much Happens, which is a more recent discovery. In these bedtime podcasts, the hosts do their best to bore you to sleep. While they drone on about hellishly trivial subjects, you get to just focus on your breathing until you conk out.

Of course, if you’re one of those people that can’t zone out if they can hear some kind of melody or vocals, you may just have to settle for white noise. Hey, if it can block out the sound of snoring, it should be able to muffle your inner monologue.

Alternatives to Sleeping With Headphones On

If you’ve been thinking about getting headphones for sleep, I’m going to assume that you prefer to doze off with some kind of noise surrounding you. However, if you haven’t had much success wearing headphones to bed, you might have to use:

  • Your phone to play whatever you want and hope it won’t bother your roommate or partner. In fact, you could even have them put on headphones or earplugs instead!
  • A bedside Bluetooth speaker if you like to keep your phone away from your bed. You’ll even find that some of them also have white noise features.
  • A white noise sound machine with nature sound effects. Of course, those sound profiles are also available on YouTube and other platforms.

On the other hand, if you don’t particularly like falling asleep in a noisy environment, you could try:

  • Earplugs, which provide almost complete silence but may irritate your ears if you don’t choose the right ones. There are disposable foam ones, reusable silicon plugs, and moldable ones. But even within those groups, different softness levels and shapes influence the fit. So choose wisely!
  • Earmuffs, which are like sleep headphones anyway since they cover your ears in a similar way. They aren’t as effective at noise insulation as earplugs, but you may find them more comfortable, at least. Additionally, some of them even double as sleeping masks. While we’re on the subject, you might want to check out this eye mask with built-in wireless headphones.
Bluetooth Sleep Eye Mask Wireless Headphones, TOPOINT Cotton Sleeping...
  • 【Sleep Headphones and Sleep Mask 2 in...
  • 【Perfect Light Blockout Anywhere,...
  • 【Upgrade Chip Battery Play More Than 9...
  • 【Excellent Stereo Sound Quality】TOPOINT...

Alternatively, if the noise you’re trying to block with headphones is coming from outside of your room, you should soundproof it starting with the doors and windows.

Conk Out to the Sound of Your Favorite Tunes

There are many benefits to sleeping with headphones on. A good pair of headphones can completely shut out any external noise and replace it with a more relaxing soundscape. However, I’d still advise against sleeping with headphones unless you have no other choice.

Give your ears a break! If the person you’re sleeping next to doesn’t mind low-level noise, it’s best to just let whatever you’re listening to drone on from a bedside device. On the other hand, if you have to wear headphones for whatever reason, I hope the tips I’ve shared will help you protect your ears from the extra pressure.

The post How to Sleep With Headphones Without Choking Yourself Out appeared first on Soundproof Living.

https://soundproofliving.com/sleeping-with-headphones-on/feed/ 0
Best Noise-Canceling Headphones to Block Out Voices https://soundproofliving.com/best-noise-canceling-headphones-to-block-out-voices/ https://soundproofliving.com/best-noise-canceling-headphones-to-block-out-voices/#respond Wed, 07 Oct 2020 18:38:20 +0000 http://soundproofliving.com/?p=9744 Most people wouldn’t shop for noise-canceling headphones based on their ability to block out voices. We generally use those devices to prevent hearing loss due …

Best Noise-Canceling Headphones to Block Out Voices » Read More «

The post Best Noise-Canceling Headphones to Block Out Voices appeared first on Soundproof Living.

Most people wouldn’t shop for noise-canceling headphones based on their ability to block out voices. We generally use those devices to prevent hearing loss due to prolonged exposure to loud sounds. But if you work in an open-plan office, for example, headphones may help you block out your coworkers’ incessant gossip. With that in mind, we’re going to talk about finding the best noise-canceling headphones for the job.

Using over- or in-ear devices is the best way to get rid of noise in areas where you don’t have much control over your surroundings. Whether you’re looking for a way to increase your efficiency at work or ignore the chatterbox sitting next to you on the bus, headphones might be the only way to do it. But how efficient could they possibly be? That’s the first question we’re going to answer.

Man wearing noise canceling headphones for blocking voices.

Do Noise-Canceling Headphones Block Out Voices?

Noise-canceling headphones can block out any kind of noise, including the sound of people talking. However, active noise-canceling technology isn’t as useful in this case as passive noise blocking. After all, the former is generally better at canceling out continuous sounds rather than those that naturally ebb and flow.

Active noise control requires several components. A microphone that picks up surrounding sounds, a machine that inverts said frequencies, and speakers that then play the opposite sounds back to you. As a feature in a pair of headphones, active noise control should function even without music.

Even then, there’ll be a small delay between the original sound and the playback of the opposite frequencies. It usually takes a moment to invert the original audio recording. That’s why the technology isn’t very effective at blocking out the sound of human speech as it is too unpredictable. Still, it can be incredibly helpful in vehicles, since the sound of traffic is more consistent.

Still, ANC can have a moderate amount of success in blocking the sound of speech. For example, it’s more likely to work if you’re trying to muffle your coworker’s distant droning as long as the frequency is under 1,000 Hz. However, if someone is talking animatedly right next to you, it’ll be less effective. That’s where passive noise blocking comes in.

Passive noise canceling relies on physically closing the ear off by either plugging or surrounding it with foam. That’s why you need to look for earbuds or over-ear headphones if you want to mute a conversation. With that being said, let’s talk about the best types of headphones for blocking out voices.

The Best Types of Headphones to Block Out Voices

As we have established, active noise-canceling technology isn’t exactly necessary for blocking voices. It may even be an unnecessary expense — though all of the products I’ll recommend later do have it in some form or another. Before we get into the reviews, though, let’s take a moment to talk about the best types of headphones you could use to block out voices.

Earbuds or In-Ear Headphones

Having previously explained the benefits of using in- and over-ear headphones, I won’t bother going in-depth about them again. However, I will reiterate some of my main points about these two types of headphones.

If you’re used to wearing in-ear headphones, you should make sure to get the kind that has flexible tips. The silicon will bend to the inner contours of your ears, creating an airtight seal. That should eliminate any chance of you picking up surrounding sounds, including voices, allowing you to enjoy whatever you’re listening to.

Of course, plastic earbuds that cling to the external part of the ear usually aren’t as comfortable as the kind that dip inside the ear canal. More to the point, they can’t really provide the physical barrier you need.

Over-Ear Headphones

Many people find in-ear headphones of any kind extremely uncomfortable. They usually prefer the passive noise blocking they get from over-ear headphones. However, if you’re going to be shopping for your headphones online, the difference between on- and over-ear headphones may not be obvious.

Ultimately, having a ring of foam around your ears is much more effective at blocking noise than simply having the foam press against your ear. So you’ll want to look for products that are described as around- or over-ear headphones.

While we’re on the subject, I should note that some over-head headphones are better at preventing noise from reaching your ears than others. In addition to high-quality foam, you’ll also want to get a pair of closed-back headphones as opposed to open-back ones. The latter kind is recognizable by the holes on the outside shell of the earpads. Since those openings are usually where outside noise sneaks in, you should focus on finding headphones with a smooth outer shell.

6 Best Noise-Canceling Headphones to Block Out Voices

If you’ve been looking for the best headphones to block out voices, you may already have expectations of this list. However, in the interest of not repeating myself, I’ve opted to leave out some significant contenders. If you believe I missed an important product, you may find my thoughts on it in one of my previous articles.

1. Mpow H5 Active Noise-Canceling Headphones

If you’re looking for noise-canceling headphones on a budget, there are several brands you could check out. Mpow is one I’ve recommended before — it manufactures headsets, earplugs, and a wide range of other products. The company’s H5 headphones have some high-end features despite their low price point. Most notably, they have an active noise control feature.

No products found.

Now, as you know, that doesn’t necessarily mean much when it comes to blocking out voices. Still, the soft over-ear cushioning should provide an additional advantage — even though the headphones technically have an open back. The three slits are minimal, but they’ll provide a convenient point of entry for your coworker’s shrill laughter.

The protein padding that surrounds the 40 mm speaker drivers is also present to a lesser extent on the underside of the foldable headband. You’ll find the power button, volume keys, and Micro USB charging port on the right earpad and the active noise control switch on the left. The headphones also have a microphone you can use for telephone calls.

The battery will last for about 30 hours before needing to be recharged, but you’ll also be able to use them with an audio cable when the battery is low. The jack is on the same side as the ANC switch. However, a Bluetooth connection will give you greater freedom of movement as long as you stay within 33 feet from your streaming device.


  • Wireless over-ear headphones
  • Built-in active noise control
  • Up to 30 hours of listening time
  • Comes with an audio cable, a charging cord, and a travel bag

2. Srhythm NC25 Over-Ear Foldable Noise-Canceling Headphones

Srhythm may not be the first brand you think of when you want to get new headphones. However, the NC25 model is a fantastic choice for those who are looking for decent sound reproduction and noise blocking at a low price.

Overall, these headphones are pretty similar to the ones we’ve just discussed. They have active noise control, which is accessible through the control panel on the outer shell of the right earpad. Meanwhile, the 3.5mm audio jack and micro USB charging port are both in the usual spot on the underside of the same speaker. The product comes with a carrying case, a 23-inch charging cord, and a 40-inch audio cable, as well as an aircraft adapter.

Srhythm Active Noise Cancelling Stereo Headphones Bluetooth 5.0,NC25...
  • 🎧 【Digital Active Noise Cancelling...
  • 🎧 【Provides High-Res Audio in...
  • 🎧 【50+ Hours Music Enjoyment】A...
  • 🎧 【Unique Foldable Lightweight &...

The speakers themselves have 40mm stereo drivers surrounded by comfortable yet lightweight foam that goes around the user’s ears. The headband is also padded, in addition to being infinitely adjustable. You can extend it as well as rotate the speakers in several ways for storing purposes.

The wireless headphones can achieve a full charge within an hour or two, which will then give you about 16 hours of listening time. You’ll also be able to use the headphones for hands-free calling if you connect them to your Google Assistant or Siri app. Lastly, if you’re not too keen on the classic black option, you’ll also be able to get this product in coral or mint. However, the accompanying accessories will still be black.


  • Wireless over-ear headphones
  • Built-in active noise control
  • Up to 16 hours of listening time
  • Comes with an audio cable, a charging cord, an adapter, and a carrying case

3. Mixcder E9 Active Noise-Canceling Wireless Headphones

Coming from another lesser-known brand, Mixcder’s E9 foldable wireless headphones are a real gem. The closed-back headphones have dual 40mm drivers that ensure excellent audio reproduction as well as active noise control that should eliminate most low-frequency sounds. Yet, as always, if you’re trying to block out voices, you’ll probably want to look for good compression.

Mixcder E9 Active Noise Cancelling Headphones Wireless Bluetooth 5.0,...
  • Less noise, less distraction: Adopting...
  • Sound you can believe in: Integrated HD...
  • Latest Bluetooth 5.0 technologie: New E9...
  • Fast charging function: MSC (Mixcder Super...

Fortunately, you’ll find plenty of firm yet comfortable memory-protein foam surrounding those speakers. The underside of the headband is also padded for comfort, except for the bits on the side which allow you to twist the speakers before putting the headphones away.

The volume controls, micro USB charging port, as well as the power key are all on the underside of the left earpad. On the right, you’ll find only the active noise control switch and the audio jack.

Even though the audio cable would allow you to use these headphones whenever you want, their fast-charging feature will get you up and running (wirelessly) within minutes. Apparently, a five minutes’ charge should give you about 2 hours of battery life. Within an hour, the headphones will have enough power to deliver 35 hours of playback.

Unlike the other products I’ve mentioned, this one doesn’t use Bluetooth 4.2, opting for the 5.0 version instead. That basically means that the connection will be a bit faster and more stable with devices that also use the same system. Bluetooth 5.0 grants you more freedom of movement as well, so you’ll be able to get more than 30 feet away from the streaming device.


  • Fast-charging over-ear headphones
  • Built-in active noise control
  • Up to 35 hours of listening time
  • Comes with an audio cable, a charging cord, and a carrying case

4. COWIN E7 Active Noise-Canceling Over-Ear Bluetooth Headphones

Even though I hadn’t come across COWIN products before, the company is more popular than I’d imagined. It has products across all price ranges, though in the end, I found myself having to pick between three equally great contenders. In the end, I’ve decided to present its E7 model, though I could also wholeheartedly recommend its successor, the E8 headphones, as well as the understated SE7 design. But when all products are at such a high level of quality, the choice comes down to appearance.

No products found.

Fortunately, that’s one area COWIN’s E7 headphones excel in, mostly because of the chrome detailing in the design. In addition to the classic black and white options, you’ll be able to choose between five cheery colors — blue, yellow, red, green, and purple. Better still, the chrome elements aren’t all for show, either. The triangles on the back of the speakers allow you to control the volume and use the ANC feature.

The firm compression of the protein ear padding should eliminate any remaining external noise. When you add music into the mix, you’ll be completely protected from any surrounding sounds! The headphones should last for about 30 hours on a single charge, though you’ll also be able to use them with an audio cable even when you drain the battery. However, as is often the case, the microphone may only be functional when the headphones are in Bluetooth mode.


  • Over-ear headphones with NFC and Bluetooth connectivity
  • Built-in active noise control
  • Up to 30 hours of listening time
  • Comes with an audio cable and a charging cord

5. Bose Over-Ear Wireless Headphones 700

Even though we’ve seen several budget-friendly products that could help you get rid of the sound of peoples’ chatter, there’s a reason premium options cost as much as they do. You really can’t put a price on that kind of quality, especially when it’s paired with an impressive reputation. Bose practically invented noise-canceling headphones so the company’s current success was to be expected.

At first glance, the Bose 700 headphones look sleek yet understated. However, once you start paying attention to the details, you’ll see why so many people like them.  As evidenced by the slanted shape of the earpads and the softness of the padding, these headphones were designed with comfort in mind. Thanks to the stainless steel headband, they also provide just enough pressure to achieve the passive noise blocking effect we explained earlier.

Bose Noise Cancelling Headphones 700, Bluetooth, Over-Ear Wireless...
  • Powerful noise cancelling headphones: 11...
  • Astonishing sound: Crisp, clear details....
  • Unrivaled voice pickup: A revolutionary...
  • Keep your head up and hands free: With easy...

As for active noise control, this model offers a much more fine-tuned experience than any of the previous ones. Namely, you’ll be able to select one of 11 levels of noise canceling, giving you complete control over your environment.

The headphones are also optimized for the Google Assistant app, which is accessible with the press of a button. Of course, the same maneuver should also give you access to Alexa.

Overall, this model should perform perfectly for about 20 hours on a single charge. As with previous models on this list, though, you’ll be able to convert them into a wired pair with an audio cable.


  • Wireless over-ear headphones
  • Eleven levels of noise canceling
  • Up to 20 hours of listening time
  • Comes with an audio cable, a charging cord, and a travel case

6. Sony Wireless Over-Ear Noise-Canceling Headset

Lastly, I wanted to showcase a pair of headphones from another industry leader — Sony! The company’s WH-1000XM3 model is a wireless headset with a built-in mic that enables you to make phone calls and access the voice assistant app of your choice. If I had to compare this product to one we’ve already discussed, it would probably be the Mixcder unit. Both have a fast-charging feature, though Sony’s seems more impressive, giving you five hours of playback after a 10-minute charge.

Sony WH1000XM3 Noise Cancelling Headphones, Wireless Bluetooth Over...
  • DIGITAL NOISE CANCELING: Industry leading ANC...
  • PHONE CALL: A built-in mic enables you to...
  • VOICE ASSISTANT: Alexa enabled for voice...
  • QUICK ATTENTION MODE: Cover the right ear cup...

Interestingly, the Micro USB charging port on this device isn’t at the bottom of the earpad shell. While an interesting change of pace, its position on the top edge of the shell may be somewhat detrimental in certain weather conditions. Then again, we’re going to assume that most users would cover their heads with hoods or umbrellas if it started raining.

These headphones have another unique feature — a quick attention mode. You’ll be able to access it by covering the right ear cup with your hand, which should result in a lowered audio volume, allowing you to talk to people without even taking the headphones off. The back of the right ear cup is actually your control panel. Swipe to the sides to change songs and adjust the volume, and tap to activate your phone’s voice assistant.


  • Fast-charging wireless over-ear headphones
  • Active noise control and quick attention mode
  • Up to 35 hours of listening time
  • Comes with an audio cable, a charging cord, an adapter plug, and a travel case

Alternatives to Headphones for Blocking Out Speech

If none of the products I’ve mentioned in this or previous articles are your thing, there are other things that could block or mask the jabbering.

Earplugs and Earmuffs

Music goes a long way to muffle human speech, even without active noise control and passive noise canceling. However, if you’d rather listen to the sound of silence, there are two products you might find useful. Namely, you could always opt for earplugs or earmuffs — or double up and use both!

These are particularly great options if you’re worried about damaging your hearing. Still, because of the lack of ANC, you might only end up muffling the sound of whoever you’re trying to avoid. So you might still prefer to use one of the headphones I’ve mentioned.

White Noise

In my article about devices you could use to create a good sleeping environment, I mentioned white noise machines. They wouldn’t block out the sound of a human voice, particularly one that’s on the higher end of the spectrum. However, they might trick you into paying less attention to it.

As a mix of all humanly perceptible frequencies, white noise should be able to mask pretty much any sound. Theoretically, every note you can hear is also contained in white noise, so it should blend right in.

Now, there’s a wide range of products you could use to get this noise. On the one hand, you have mechanical and electrical white noise machines. On the other, some machines, such as white noise fans, can produce a similar sound. But if you want to test this theory before buying another gadget, you could just find a white noise track on YouTube.

You could even use a mix of nature sounds or ambient noises to achieve a similar effect. However, those don’t have the kind of scientific support white noise has.

Soundproofing Techniques

Lastly, if the voice you’re trying to block out is coming from outside of the room you’re in, you could try some soundproofing techniques. If you’re working on a budget, start with some of the cheaper solutions I’ve explained here. However, if you have time and resources to spare, you might want to check out one of my more comprehensive guides.

Enjoy Your Tunes While Blocking Out the Chatter

Ultimately, the best defense against any Chatty Cathy in your vicinity requires a three-pronged approach. Of course, active noise-canceling technology is pretty much an optional step. After all, it can only handle frequencies between 50 and 1,000 Hz, so your defense could even be two-pronged.

Passive noise blocking — having a physical barrier between the sound and your ears — can make all the difference. On top of that, music can be the final wall any external noise will have to go through. So if you still end up hearing voices through these headphones — they may be coming from inside your head!

The post Best Noise-Canceling Headphones to Block Out Voices appeared first on Soundproof Living.

https://soundproofliving.com/best-noise-canceling-headphones-to-block-out-voices/feed/ 0
7 Best Quiet Humidifiers for Bedrooms (2021) https://soundproofliving.com/best-quiet-humidifiers/ https://soundproofliving.com/best-quiet-humidifiers/#respond Wed, 29 Jul 2020 14:21:13 +0000 http://soundproofliving.com/?p=9364 A few months ago, I touched upon the benefits of owning a high-quality, quiet dehumidifier. And while some of my friends (and readers like yourself) …

7 Best Quiet Humidifiers for Bedrooms (2021) » Read More «

The post 7 Best Quiet Humidifiers for Bedrooms (2021) appeared first on Soundproof Living.

A few months ago, I touched upon the benefits of owning a high-quality, quiet dehumidifier. And while some of my friends (and readers like yourself) struggle with humidity, I also know more than a few people who have issues with dry air. With that in mind, I decided to cover the other side of the proverbial coin of moisture. In other words, I began looking into humidifiers and vaporizers.

As a result of my research, I’ve compiled a list of the best quiet humidifiers of 2021. But that’s not all this article will cover. You will also get a handy guide on buying the right humidifier, as well as a list of useful tips on how to keep your unit clean and running. More importantly, you’ll find out just how important it is to own a humidifier and how it might benefit your life overall.

List of the best and quietest humidifiers for bedrooms.

1. Crane USA Ultrasonic Humidifier

One of the key reasons for people to buy quiet humidifiers are, in fact, children. With a proper humidifier, you can get rid of bacteria from your newborn’s room and keep the little one safe. However, if that same unit is making too much noise, the child won’t be able to get the sleep it needs. So, as a parent, you will definitely enjoy Crane USA’s ultrasonic humidifier.

This stylish little unit has the shape of a transparent teardrop and it has a soothing, milky-white design. Of course, since it’s a humidifier designed for children’s rooms, it’s incredibly small. But don’t let that size fool you — this spectacular item can cover an area of up to 50 square feet.

Crane Ultrasonic Cool Mist Humidifier, Filter-Free, 1 Gallon, for Home Bedroom Baby Nursery and Office, White

In terms of noise, you will barely be able to hear the Crane USA. It’s ultrasonic, i.e., it runs at less than 30 decibels, well below any level of noise. When you turn it on, it’ll sound like a pleasant whisper, or like mild television static.

Crane USA will run for 24 hours if you leave it on the extra-low setting. However, any setting above that will deplete the water inside the tank sooner. Moreover, it has an automatic shut-off feature that activates once the water tank is completely empty.

One potential setback of Crane USA is the lack of filters. Sure, it will make your refilling job a lot easier, but regular maintenance will be a bit of a chore. If you live in a hard water area, you might need to purchase a demineralization filter, just to be on the safe side.


  • 24-hour runtime on the lowest setting
  • 360-degree mist nozzle for better coverage
  • 1-gallon water tank
  • Stylish and elegant design
  • Perfect for babies and young children


  • Difficult to clean
  • Doesn’t perform well in hard water areas without a filter

2. Pure Enrichment MistAire Humidifier

Another product that has a neat teardrop design and a 360-degree mist nozzle, the Pure Enrichment MistAire is a beautiful unit with a lot to offer. And when compared to Crane USA, it also shares the same basic setbacks. Mainly, if you were to use MistAire in hard water areas, it might underperform. In addition, the main water tank is difficult to clean, which might be a dealbreaker for some users.

Pure Enrichment MistAire Ultrasonic Cool Mist Humidifier - Premium Humidifying Unit with 1.5L Water Tank, Whisper-Quiet Operation, Automatic Shut-Off and Night Light Function - Lasts Up to 16 Hours

However, the benefits far outweigh the flaws. MistAire is another whisper-quiet ultrasonic humidifier, running at 30 decibels. It’s perfect for bedrooms since it doesn’t take up a lot of space and isn’t noisy. Couple that with its 16-hour runtime on the lowest setting and you have the best recipe for a good night’s sleep, with enough moisture in the air.

Looking at the design, you might be tempted to buy MistAire just because of how beautiful it is. But the white-and-blue combination is there for more than just aesthetics. The light-blue, see-through tank lets you easily check how much water you have left. And thanks to its 360-degree nozzle, it can reach a wide area, making it suitable for large and small rooms alike.

I feel that it’s instructive to note just how popular Pure Enrichment MistAire really is. On Amazon alone, there were a staggering 10,000 units sold, making it one of the most sought-after humidifiers. That fact alone earns MistAire a spot on this list.


  • 360-degree mist nozzle for better coverage
  • Stylish and elegant design
  • Perfect for both large and small rooms
  • 16-hour runtime on the lowest setting
  • Automatic shut-off function


  • Difficult to clean
  • Doesn’t perform well in hard water areas without a filter

3. Vicks Warm Mist Humidifier

Vicks is the first warm mist humidifier on this list, and it’s here for a good reason. Just like MistAire, this product has had thousands of units sold over the years, with people praising it as one of the best warm mist humidifiers on the market.

Naturally, all of the praises Vicks is getting are warranted. After all, Vicks is a household name that has produced high-quality items for decades. Everyone knows the health benefits of their most famed product, the VapoRub. So, it was only a matter of time before the brand included humidifiers and vaporizers in its product line, including the one you’re currently reading about.

Vicks VWM845 Warm Mist Humidifier

As a warm mist humidifier, Vicks removes over 95% of all bacteria from the air. Couple that with the automatic shut-off feature and you get a splendid unit that performs incredibly well and helps you stay healthy. Moreover, Vicks doesn’t use filters, so you won’t have to go through the hassle of replacing any after the water runs out.

Lots of humidifiers, both warm and cold mist ones, don’t have any humidity regulation settings. But Vicks most definitely has it; thanks to its two output settings, you can regulate the level of moisture at any given time.

In terms of runtime, it’s a bit behind the previous options I mentioned, at 12 hours on the lowest setting. But that’s more than enough time if you want to keep the unit on while you’re asleep.  


  • 1-gallon water tank
  • 12-hour runtime on the lowest setting
  • Stylish and economic design
  • Perfect for cough and congestion relief
  • It can use aromatic pads for added comfort
  • Medicine cup for inhalants


  • Bacteria removal not as effective as other warm mist options
  • Difficult to clean

4. Honeywell HCM350W Humidifier

The HCM350W has been on the top 10 lists since early 2020, and to date has remained one of the best-rated units out there. Thanks to its simple and effective design and noise-free performance, it’s possibly the most high-quality product that Honeywell has to offer.

Honeywell HCM350W Germ Free Cool Mist Humidifier White

With its 1-gallon tank, the HCM350W will have more than enough water to provide your room with cold mist. It will maintain the humidity level between 40 and 60, i.e. the perfect level for improving your overall health. Your skin, breathing, and sleeping pattern will improve and there will be next to no static electricity in the air.

One unique feature of Honeywell’s HCM350W is its native UV technology. When it’s humidifying, this unit will get rid of 99% of harmful bacteria from the air. It’s a perfect humidifier for the winter months, since it will keep your flu and colds at bay.

When using the lowest setting, you can humidify the room with HCM350W for 24 consecutive hours. Not only is that perfect for your sleeping schedule, but it’ll also keep your home hydrated if you’re away for a while.

Of course, the HCM350W has its own flaws. For instance, it uses filters that you will need to replace often. However, the filters are quite expensive, so you’ll be spending a lot of money to keep this device running smoothly. In addition, you will have to replace the wick regularly, as well as frequently take the fan out and clean it.


  • 1-gallon water tank
  • 24-hour runtime on the lowest setting
  • 99% bacterial removal
  • Water tank is easy to clean
  • Stylish and elegant design
  • Helps prevent health issues


  • Replacement filters are too expensive
  • The fan is difficult to clean

5. VicTsing Cool Mist Humidifier

VicTsing is possibly the best budget-friendly cool mist humidifier. If you want a portable, whisper-quiet option that won’t cost you a lot of money, then look no further than this wonderful, white-blue item.

Running at 32 decibels, the VicTsing is only barely louder than some of the more expensive devices out there. However, it’s still silent enough to the point where you won’t even notice it’s on.

The water tank of VicTsing has a half-gallon capacity, making it perform somewhat less efficiently than the other options on this list. Despite the tank size, however, this item has a runtime of 10 hours on the lowest setting, which is perfect for running it at night while you’re asleep. And in case that half a gallon water is used up, the automatic shut-off feature will turn the humidifier off. Moreover, the LED lights will warn you in advance if the water runs out.

Unlike other commercial humidifiers, the VicTsing has a simple set of controls. All you have to do is turn one know to the desired setting and you’re all set. However, I should stress that you must be careful when setting up your VicTsing. It has the tendency to leak condensed water around its base, so put a tray or a towel beneath the unit, just to be safe.


  • One of the most affordable humidifiers on the market
  • 10-hour runtime on the lowest setting
  • LED lights and automatic shut-off feature
  • Portable and easy to set up
  • A single knob that controls everything about the unit


  • Potential water leakage if you use it on the highest level
  • Not as durable as the pricier products on this list

6. TaoTronics TT-AH001

TaoTronics has taken the humidifier market by storm. In fact, if you merely mention that you need to buy a humidifier, one of the first brands that people will recommend to you is TaoTronics. And one of the first products that you’ll get recommended will definitely be TT-AH001.

TaoTronics Humidifiers, 4L Cool Mist Ultrasonic Humidifier for Bedroom Home Large Room Baby Room, Quiet Operation, LED Display with Humidistat, Waterless Auto Shut-off (1.06 Gallon, US 110V)

On the surface, the TT-AH001 looks quite innovative. There are a few basic humidifier designs that most companies stick to, so there isn’t a lot of room for innovation. But TaoTronics managed to find a way, and TT-AH001 has a futuristic, high-tech appearance that tech junkies will simply love.

Of course, it’s not all about the looks. The TT-AH001 performs extremely well, with a 1.6-gallon tank and a 24-hour runtime. And while it does run at 38 decibels (more than other products on this list), it’s still one of the quietest humidifiers on the market today. More importantly, it can cover a vast area — up to 322 square feet, to be exact.

The TT-AH001 also excels when it comes to safety. The automatic shut-off sequence allows you to save power when the water in the tank runs out. Moreover, the patented microporous cartridge will keep the microorganisms and bad odor away, giving you fresh, humid air. All of these properties make this unit perfect for your baby’s room.

Finally, unlike a lot of other humidifier options out there, the TT-AH001 also has a humidistat. With the push of a button, you can choose between several different mist settings and humidity levels.


  • 24-hour runtime on the lowest setting
  • Microporous cartridge for cleaner water and air
  • 1.6-gallon water tank
  • Wide coverage area
  • Humidistat with several different humidity and mist options to choose from


  • No handle for carrying it from room to room
  • The tank isn’t attached to the base, which might cause spilling

7. TaoTronics Cool Mist Humidifier

Yes, TaoTronics as a brand is so popular that it’s no wonder two of their products ended up on this list. And based on user feedback, this particular humidifier does, indeed, excel across the board.

Humidifiers TaoTronics Cool Mist Humidifiers for Bedroom 6L Humidifier 26dB Ultra Quiet 1M High Output Wide Opening Easy to Clean and Fill, Night Light, Auto Shut Off, 6L/1.59 Gallon

The TaoTronics cool mist humidifier stands out from the crowd thanks to its own unique design. And while the TT-AH001 has that futuristic, SF feel about it, this item looks like a modern work of art. The sleek black exterior with shades of blue and white was a bold choice by TaoTronics. No matter where you put this unit, it will fit right in and even bring a dash of class to the room.

Performance-wise, this TaoTronics product has a lot to offer. For instance, it can run for a whopping 60 hours without refilling. That’s almost three times more than some of the bestsellers out there, and almost six times more than some of the options listed above!

And the large numbers don’t end there, either! Thanks to its 360-degree swivel nozzle, the cold mist humidifier can cover a huge area of 430 square feet. That makes it ideal for large bedrooms, but it’s just as effective in snug, compact spaces.

Of course, with that type of water tank capacity and runtime, you’d think that a beast like this unit has to be loud. But then you’re in for a shock; not only is this TaoTronics product quiet, it’s in fact quieter than every other product I’ve listed. It runs at an incredible 26 decibels! In short, it seems as if you can’t get any better than TaoTronics.


  • 60-hour runtime on the lowest setting
  • 360-degree swivel nozzle for ultimate coverage
  • Covers a huge area
  • Quieter than any other option on the market today
  • Automatic shut-off function
  • Stylish and elegant design


  • No ability to adjust the mist type or temperature
  • Nightlight cannot be switched off

Quiet Humidifier Buyer’s Guide

Humidifier Type

Broadly speaking, there are two major types of humidifiers. Based on the type of mist they create, they are classified as either cold mist or warm mist humidifiers. However, you might also come across a third type. Known as a dual humidifier, this product can produce both hot and cold mist, depending on your needs.

Cold Mist Products

As the name suggests, these humidifiers produce cold mist. In terms of availability, they are the most common type on the market because of how safe and reliable they are.

Cold mist humidifiers themselves have two subcategories. The first of the two includes the so-called evaporative models. This type of humidifier uses a wick filter; a fan will blow into the wet wick, causing the air to cool in the process. And while this process is great if you want to avoid any mold and mildew growth or water condensation, the wicks are expensive and they need to be replaced frequently.

The second subcategory of cold mist products includes the ultrasonic models. They use a small vibrating diaphragm called a nebulizer to produce a fine mist. And because they have no fans, these models are some of the quietest on the market. However, lots of water tends to condense around an ultrasonic humidifier, so the surface below can get soaked.

Warm Mist Products

Warm mist products, also known as steam vaporizers, are not as common as cold mist humidifiers. However, they are usually not very pricey, so people tend to buy them quite often.

There are a few setbacks to warm mist humidifiers. A typical unit uses a heating element to boil the water inside and release warm mist. With that in mind, you have to be careful with the humidifier, since the water can cause severe burns. In addition, the warm mist isn’t something you want in your home if you have a cold, since it can cause your nasal passages to swell and endanger your breathing.

Of course, the benefits outweigh the drawbacks. A typical warm mist humidifier is perfect if you’re in the middle of winter because the mist will maintain warmth inside the house. In addition, you can use a warm mist unit together with a medical inhalant for cough relief. 


Each unit has a water tank, and when picking the right humidifier, you need to find out what the tank’s capacity is. That way, you’ll know when and how to refill it and, more importantly, how big of an area it can cover.

Depending on how large your bedroom is and how often you spend your time at home, you’ll probably need a humidifier that can produce mist for at least 24 hours. If possible, get a product that goes well beyond that capacity.

Coverage Area

Coverage area is actually intimately linked to the water tank capacity; usually, the smaller the capacity is, the smaller coverage the humidifier will have.

Now, if you have a large bedroom, you don’t want to buy a humidifier that’s too small. It will be a waste of money and you won’t get the desired humidity. But the same goes for oversized units; unless you plan on covering more than one room with the same product, don’t waste money on something huge.


Some users will only have the humidifier on for a couple of hours. However, if you have a snoring problem or live in an incredibly dry area, you will need to keep the humidifier on for a lot longer than that. So, when buying a unit for yourself, make sure that it has the runtime that suits your needs. The rule of thumb is simple: the bigger the water tank, the longer the runtime.

Noise Level

It should go without saying that, in order to get the best quiet humidifier, you’ll need to get one that produces a specific level of noise. But how can you know which units are quieter than others?

Before buying a particular brand of a humidifier, check their sound pressure level. If it’s anywhere between 32 and 38 decibels, you’re good to go. Furthermore, check the type of your unit as well; ultrasonic humidifiers usually produce the least amount of noise.   

Warranty and Price

Just like any other electrical appliance, a humidifier should be made to last. With that in mind, when shopping for your vaporizer of choice, always check the warranty. A typical humidifier can usually run for a couple of years, with the high-end models lasting for over a decade.

In terms of pricing, it comes down to what type of product you need and how often you plan on using it. Personally, I’d suggest avoiding ultra-cheap models, since they could be underperformers. On the other hand, you don’t have to pay thousands of dollars just for a humidifier. Instead, do a bit of market research and track down the best-rated models, like the ones on the list above. Then pick a model according to your budget and specific needs.

Bonus Features

Bonus features are not vital to a humidifier’s performance. However, they can actually prove to be invaluable to you. For example, if your humidifier has an automatic shut-off function, you don’t have to physically turn it off after waking up in the morning. Once it’s done humidifying the room, it’ll shut off immediately. Other features involve smart LED shut-off indicators, extra controls for intensity and mist type, and the ability to add scented liquids and essential oils to the water tank.

Frequently Asked Questions About Humidifiers

Why Should I Buy a Humidifier?

There are more than a few benefits to owning a humidifier. In fact, using one on a daily basis can actually improve your overall health in several important ways.

An average humidifier gets rid of harmful particles in the air while making it ‘wetter.’ Moist air will add some humidity to your airways and sinuses, which will reduce the risk of asthma and various allergies. In addition, you will be less likely to catch the flu and your coughs will contain more moisture; the more mois the cough, the more phlegm you’ll release during a cough.

Most of us tend to have some skin or hair issues, and dry air is, more often than not, responsible for them. The same goes for cracked or chapped lips. So, if you want to see your skin glisten again or your hair reclaim its full volume, a humidifier is definitely the way to go.

Now, snoring might not be as serious as influenza or allergies, but it is a problem lots of modern households face. In order to get rid of that pesky snoring habit, you’ll need more humidity in the air as soon as possible.

Finally, a humidifier is just as beneficial to your home, your pets, and your plants as it is to you. Like us humans, animals require some moisture in the air to help them with their own allergies or illnesses. Plants, in particular, will benefit from being in an environment with lots of humidity, as it boosts their growth and development. As for our homes, both wooden floors and brick-and-mortar walls can crack over time due to dry air, so some humidity is necessary.

How Should I Maintain My Humidifier?

If you own a humidifier, you have to remember to clean it regularly. A dirty unit can and will produce a lot of noise. In addition, it can be a breeding ground for bacteria, mold, and other invasive living beings. 

With that in mind, here are some basic tips on how you can clean and maintain your own unit:

  • Read the instructions well and stick to them
  • Wash and dry the unit after each and every use
  • Find the proper cleaning tools and chemicals
  • Always use fresh distilled water
  • Replace the filter
  • Clean it before and after storing it
  • Make sure that the area around the humidifier is dry
  • Unplug the product when you’re done using it

How Often Should I Refill the Humidifier?

On average, a portable quiet humidifier can operate for 24 hours before you need to refill it. Of course, there are other brands, both portable and otherwise, that operate for even longer periods than that. So, generally speaking, you will need to refill it every 24 hours or so, at least.

Where Do I Place the Humidifier?

When it comes to your bedroom, the best place to put a humidifier should be at least 3 feet away from the bed. However, there are other, general guidelines you ought to follow. For instance, make sure that the unit is at least 2 feet above the floor and that it’s on a level surface that isn’t wood or metal. If you HAVE to place it on a metal or wooden surface, simply put a plastic tray between the surface and the unit itself.

How Can I Make It Even Quieter?

It depends on what type of humidifier you’re using. In general, try the following steps:

  • Place the fan away from walls or anything else that might obstruct the airflow
  • Put the humidifier on a folded rag or towel so that it doesn’t vibrate as much
  • Take the top off the impeller tip
  • Replace the filter

Should I Use Distilled Water?

Distilled water is the recommended option. In fact, you can even buy distilled water specifically for humidifiers. However, there are brands out there that can use tap water perfectly fine.

Will Any Water Leak on My Floor?

The short answer is yes. Because of vapor emission, water will condense on the humidifier and drip to the floor. That’s why using a towel or a rag is highly important.

Can I Add an Oil or a Fragrance to the Water?

Some brands of humidifiers support this option, others do not. Before you try to do it, contact an expert or research your favorite brand of humidifiers. Adding anything other than water to the unit might damage the circuitry.

Final Thoughts

Proper air humidity is incredibly important to our health and wellbeing. I’ve personally met a lot of people who think that a humidifier is a “luxury item” and that it serves no real purpose. But that’s simply not true; a high-quality, quiet humidifier can help you keep your health in check. And if you pick one of the options from the list above, you’re also guaranteed to get your much-needed beauty sleep every single night.  


The post 7 Best Quiet Humidifiers for Bedrooms (2021) appeared first on Soundproof Living.

https://soundproofliving.com/best-quiet-humidifiers/feed/ 0
Best Quiet Ceiling Fans to Keep You Cool at Night https://soundproofliving.com/quiet-ceiling-fans/ https://soundproofliving.com/quiet-ceiling-fans/#respond Mon, 20 Jul 2020 21:14:37 +0000 http://soundproofliving.com/?p=8617 It’s safe to say that I have a love-hate relationship with ceiling fans. They provide the airflow and the breath of fresh air I so …

Best Quiet Ceiling Fans to Keep You Cool at Night » Read More «

The post Best Quiet Ceiling Fans to Keep You Cool at Night appeared first on Soundproof Living.

It’s safe to say that I have a love-hate relationship with ceiling fans. They provide the airflow and the breath of fresh air I so desperately need. However, they also produce that annoying “whoosh-whoosh” sound that’s slowly but surely driving me insane.

List of the best and quietest ceiling fans on the market.

The Search for the Quietest Ceiling Fan Begins

Because I value both my sanity and the ability to breathe cool, fresh air, I began searching for the best quiet ceiling fans the market has to offer. Here’s the kicker, though — the best ceiling fans on the market aren’t necessarily the quietest ones. The same goes for other types of fans as well.

If you want a quiet fan, but you don’t want to compromise on the quality and features like size and the number of blades, don’t worry — there are quite a few fans out there that will meet all your needs.

However, before we dive into the list of the best quiet ceiling fans and my reviews, there’s one thing we need to do first. Knowledge is power, so here’s everything you need to know about the features that contribute to fans being as quiet as possible (and, of course, about the ones that don’t).

Features That Contribute to the Low Volume of Ceiling Fans

How will you recognize that a particular ceiling fan is quiet if you don’t actually hear it yourself while it’s working? What’s more, even if you do hear it, how do you know it’s as quiet as possible if you have nothing to compare it to?

Well, here are some things you should definitely pay attention to while searching for the quietest ceiling fan.

Motor Type

There are several motor types that will provide the low-level noise you’re looking for:

  • DC motors
  • Flywheel motors
  • Oil bath motors

However, not all of them have the same capacity to dampen or reduce the noise.

Those of you on the lookout for the quietest ceiling fan should definitely consider one with a DC motor. These come with high-end fans and are the newest generation of ceiling fan motors on the market. You might remember this particular type from one of my previous articles about quiet pedestal fans.

The typical “whoosh-whoosh” sounds I mentioned are the result of electromagnets in regular motors. Aside from that, some fans develop a distinct clicking sound over time because their regular motors tend to overheat. When a fan runs hot, the entire body and the components wear out quite quickly. That’s what can produce the clicking sound.

DC motors, however, are brushless and have permanent magnets, so they can’t overheat. There won’t be any electrical buzz (or humming) either since there are no electromagnets. The motors are quite compact too. There’s less room for wiggly parts that would potentially create a rattling sound.

Oil bath motors aren’t a bad choice, either. They aren’t as quiet or as advanced as DC motors, but they do reduce the overall vibration of the fans as well as the sway. However, they do require more maintenance, as you have to change the oil every five or so years.

Flywheel motors, or the regular AC motors I already mentioned, have flywheel discs in them. These discs are able to absorb shock, thus dampening the overall noise.

Why a DC Motor Is the Superior Choice

Aside from being the best the industry has to offer, DC motors also have higher torque than other motor types. That means that they can produce more force to rotate the fan blades on the axis and, thus, generate angular acceleration.

Furthermore, DC motors are lightweight, which automatically makes them produce less noise. It also allows for a slimmer design, which is a nice bonus (although not as important as the noise level).

Size, Material, and the Quality of the Motor

In terms of build quality, the better the motor is, the quieter it will be. Big, high-quality motors will produce less noise because they are less likely to break down. Also, they run more smoothly than smaller, low-quality motors, which are even prone to random rattling and clicking noises.

Motor Efficiency

Energy-efficient motors produce less noise. This is actually a double whammy, given that you should be looking into appliances with high Energy Star ratings anyway. They will significantly lower your monthly energy bill.

However, aside from airflow efficiency, you should also look into the general efficiency of the motor. CFM (which stands for cubic feet per minute) determines the amount of air the ceiling fan is capable of moving.

Now, the higher the CFM rating is, the louder the fan will be. If it is capable of moving a massive amount of air, we can’t exactly expect it to do that quietly. So, a lower CFM rating might not provide the same hurricane-like feeling as a higher rating would, but the breeze you get will be as quiet as a whisper.

A low or average CFM rating is also an important factor to consider when you’re looking for a quiet fan for your bedroom. Because a lower rating means that the fan doesn’t move a huge amount of air, it should actually be more gentle. Some people prefer this type of airflow since they have to keep their fans on all night long in those never-ending, hot summer months.

Of course, if the fan has a strong, powerful motor, then it can achieve both the low level of noise you’re looking for and a high CFM. It will, however, be pricier.

Component Material and Overall Quality

The material of the blades and the body of the fan are almost equally important. If the blades of your fan are thin and plastic, the quality of the motor won’t matter. Sooner rather than later, the thin blades will warp — and that will increase the level of noise.

Therefore, it’s vital that the fan is made of high-quality, sturdy, and durable component materials. Thin components made out of cheap, scrap metal or plastic will rattle. There’s simply no way of avoiding that.

Blade Count

As a general rule of thumb, you should pick fans with more blades. That’s especially true if you’re looking for your fan to be as quiet as possible.

The more blades a fan has, the quieter it is. That’s because more blades distribute the air more evenly. However, keep in mind that a higher number of blades also entails less airflow. Fans with fewer blades are able to spin faster due to less friction. Therefore, those fans are capable of creating more airflow.

For example, three blades will drag the motor less than five or more blades, and the motor will be able to spin quickly. Still, five blades will make the fan more balanced, so its entire weight will be evenly distributed. All of this contributes to the fan’s quietness.

If you’re willing to dent your wallet enough for a high-end fan with a stellar DC motor, then you might be able to get the best of both worlds. DC motors are powerful enough to provide sufficient airflow while staying super quiet even when the fans have only three blades.

Mounting Hardware

If the fan isn’t mounted directly and properly onto the ceiling, there’s a good chance it will make noise. Over time, the screws holding the fan in place may get a bit loose. In that case, the fan can wobble and rattle against the ceiling. So, by keeping it as close to the ceiling as possible, and mounting it tightly, you’ll make sure there’s no extra noise that contributes to the overall loudness of the fan.

However, there are many fans on the market that aren’t mounted directly to the ceiling. These fans (also known as protruding fans) are meant for rooms with high ceilings, and they come with a downrod that lowers them in order to achieve optimal airflow. The downrod can be anywhere from six to twelve or more inches long.

Now, you may think that protruding fans aren’t a good choice at all since I have already said you should mount fans as close to the ceiling as possible. However, that’s not necessarily true.

Just because a fan has a rod doesn’t mean it will wobble and make noise. It just means that there’s a bigger chance of that happening than with fans that are mounted directly onto the ceiling, especially if you don’t assemble it correctly.

You can avoid that by picking a fan with sturdy mounting hardware. High-quality, durable screws and a stable, metal one-piece downrod will reduce the chances of the fan oscillating and producing noise even at the highest speed settings.


When it comes to quiet ceiling fans, it’s all about balance. A well-balanced fan is one that’s precisely made and assembled. That means there’s no wiggle room between the components and between the fan and the ceiling.

So, pay close attention when tightening the screws. That’s the only way to make sure your fan runs smoothly and quietly.

Of course, if the fan is of poor quality or has unbalanced components, it won’t matter how much you try to balance it out. It will still make noise. So, again, high quality is the way to go if you’re looking for some peace and quiet.

The Best Quiet Ceiling Fans on the Market

Now that you know what to pay attention to (and what to base your decision on), we can dive into the actual fan reviews.

There are some giant brands that dominate the fan market and guarantee a quiet, smooth operation. For example, all Dyson fans are a great choice for anyone looking for a quiet fan. If you’re interested (only) in this company, make sure to read my article on Dyson fans, where I reveal if they really are quieter than others.

However, for the sake of variety, I included six different fans from various manufacturers on my list. All of these are excellent, high-quality, and most importantly, quiet.

1. Casablanca Stealth Ceiling Fan (54 Inches, 5 Blades)

I’ve chosen to start my list off with Casablanca Stealth, one of the sleekest and most modern quiet ceiling fans out there. I haven’t reviewed products from this particular branch of the Hunter Fan Company before, which is another reason I included this particular fan here.

Casablanca has been a strong contender on the fan market since the early seventies, and its products are definitely worthy of my (and your) attention.

Casablanca Stealth 54 Inch 5 Blade Ceiling Fan 59090
  • Style:Modern Contempo
  • Finish: Brushed Nickel
  • Number of Bulbs: 1

The Casablanca fan I chose for you today is the Stealth five-blade ceiling fan. Casablanca has quite a few products, but the Stealth falls into the “quieter” category, thanks to its six-speed DC motor. As mentioned, DC motors are far superior when it comes to silent operation and energy conservation. The motor only uses 31 watts to operate (even at high speeds).

It’s important to note that the Stealth moves around 6,500 CFM. This is more than what your average, run-of-the-mill ceiling fan can manage (around 4,000 CFM) but less than what a super strong and noisy fan moves (up to 10,000 CFM).

What Makes It Stand Out

The most notable feature of the Casablanca Stealth is the pitch of the blades. With five blades, this beauty already distributes air quite nicely and evenly. However, with a steep, 14-degree pitch, it also moves more air and does so more quietly than a fan with flat-pitched blades ever would. There’s little or no chance of any wobbling happening, which also means less additional noise.

Finally, this particular fan comes with a downrod and can’t be mounted directly onto the ceiling. This might cause a slight noise issue if you don’t mount everything tightly. However, since the Stealth has excellent overall material quality, you shouldn’t hear any additional noise due to a rickety downrod.


  • Five blades with a 54-inch span
  • High-quality reversible DC motor
  • 14-degree blade pitch
  • Comes with a two or a three-inch downrod
  • Wired wall control

2. Emerson Indoor/Outdoor Ceiling Fan (30 Inches, 3 Blades)

Emerson Tilo Modern Ceiling Fan has to be one of the most versatile ones out there.

First of all, it is a rare (quiet) indoor/outdoor model, which is perfect for those of you who need fans on your patios and in your gardens. Additionally, it has a dual-mount feature, which means that it’s a good fit for rooms with low, standard, and high ceilings.

kathy ireland HOME Tilo Modern Ceiling Fan, 30 Inch | Dual Mount Low...
  • Four-speed wall control
  • Damp location approved
  • Three curved plywood blades
  • Dual-mount

This Emerson ceiling fan is quite small — it has a 30-inch blade span. Weighing only 11.6 pounds, it is also quite light.

Still, with only three blades, it isn’t the most powerful fan out there. Its direct drive motor only generates around 2,600 CFM of air — not exactly “hurricane-level.” It is, however, quiet, which is kind of what we’re going for.

What Makes It Stand Out

The thing I like the most about this fan is something I already mentioned — the versatility. The dual-mount feature makes it a great choice for all ceiling heights. You can mount it directly onto the ceiling, or you can use the 4.5-inch downrod that comes with it if you have a ceiling higher than nine feet.

The Emerson Tilo Modern Fan has curved plywood blades that also have a steep pitch. The blades come with reversible rotation too, which means that they can rotate clockwise or counterclockwise, ensuring ideal airflow and hot/cool air distribution all year round.

Overall, this isn’t the most efficient ceiling fan out there, both when it comes to energy and airflow. However, it’s whisper quiet and suitable for various environments, which, in my opinion, makes it worthy of a spot on this list.


  • Four-speed wall control
  • Bluetooth compatible
  • Dual-mount feature
  • Suitable for a damp environment
  • 42-watt energy consumption

3. Monte Carlo 8tnr56rzwd Ceiling Fan (56 Inches, 8 Blades)

Remember when I said that the more blades the fan has, the better it is? Well, here to prove me right is the Monte Carlo Protruding Mount Ceiling Fan, which has eight blades. Yes, you read that correctly — this fan has eight blades that are pitched at various degrees, ranging from 15 to 60, for optimal, quiet operation.

Monte Carlo 8TNR56RZWD Protruding Mount, 8 Rubberized White Blades...
  • Blade pitch ranges from 15 degrees to 60...
  • For remote replacement, order: TN-REMOTE
  • Premium power 165 X 25 mm DC motor for quiet...
  • Ultra efficient energy saving 6 speed...

With a 56-inch blade span, this is one of the biggest quiet ceiling fans on my list. It’s ideal for large rooms, and given that it’s a protruding type of a ceiling fan, it’s also a good pick for rooms with high ceilings. It protrudes around 18 inches from the ceiling, and it has an 8-inch downrod.

What Makes It Stand Out

The most prominent feature of the Monte Carlo Protruding Ceiling Fan is its powerful brushless ultra-quiet DC motor. It powers its staggering number of blades and generates more than 8,300 CFM.

Now, with such a high CFM, you’d think that the fan would be too loud for you to work or sleep while it’s on. Some people love using their fans as white noise machine substitutes, but as you know, I’m not one of them.

As we have already established, if the motor is powerful enough and the blades are balanced properly, the high airflow won’t be as loud as you fear. So, thanks to the differences in the blade pitch, as well as the marvelous balance of the blades and the fan itself, this beauty will cool your office or bedroom without so much as a whisper.


  • DC brushless motor
  • Remote controlled
  • 6-speed reversible motor
  • 31-watt energy consumption
  • 8-inch downrod included
  • Rubberized blades

4. Hunter Fan 51059 (42 Inches, 5 Blades)

Compact and lightweight, the Hunter Low Profile Ceiling Fan from the IV collection is a great choice for small rooms. Don’t be fooled by its 14.3-pound weight because this fan actually packs quite a punch.

This ceiling fan is surface-mounted, which lessens the chance of it getting wobbly over time and producing additional noise. It’s also equipped with a reversible WhisperWind motor. That, paired with its relatively small size, makes it a year-round solution for small rooms. It can generate downward airflow in the summer and upward in the winter.

Hunter Fan Company 51059 Hunter Indoor Low Profile IV Ceiling Fan with...
  • CLASSIC CEILING FAN: The traditional ceiling...
  • PULL CHAIN CONTROL: Turn the white ceiling...

I actually stumbled upon this model when I was looking for a small office fan. The modern minimalistic design and surface mounting make it a perfect choice for my small, low-ceiling office.

What Makes It Stand Out

It’s worth mentioning that this fan is made by a company that has over 130 years of experience in the business. They have used that time well and perfected their fan craftsmanship. The five blades all have a 13-degree pitch and are powered by a motor that can generate over 2,900 CFM of airflow. This might seem low, but don’t forget that the fan is meant for small spaces.

The only thing I mind about this particular fan is the lack of energy efficiency. With an average energy consumption of 57.4 watts, it’s not exactly the most efficient fan on my list. However, since I prioritize quietness over anything else, especially when it comes to fans for small rooms where I spend a lot of time, this particular issue isn’t a dealbreaker for me.


  • WhisperWind reversible motor
  • Five blades with a 42-inch span
  • 57.4-watt energy consumption
  • Pull chains provide easy access to commands

5. Minka-Aire Ceiling Fan (52 Inches, 3 Blades)

And yet another three-blade fan made its way onto my list. Minka-Aire F844 is, in my opinion, one of the most elegant quiet ceiling fans on the market. Available in a couple of options, including a distressed koa body and a wood-like, rustic design, it is a perfect choice for all those homeowners who shy away from an overly modern aesthetic.

Minka Aire F844-DK, Light Wave 52" Ceiling Fan with LED Light Kit in...
  • DESIGN: The Minka-Aire Light Wave ceiling fan...
  • BULB: The Light Wave ceiling fan includes an...
  • INCLUDED: RCS213 - Three-speed hand-held...
  • MOTOR: Conveniently quiet, 3 speed -...

With three blades that have a 52-inch span and an average airflow capacity of around 3,600 (which can also go up to over 4,500 at the highest speed), this protruding model is a great choice for rooms with high ceilings. The fan also has a direct drive motor, which, combined with a large blade span, is powerful enough to generate a lot of airflow.

As you know by now, direct drive motors aren’t the most fitting choice when it comes to quiet fans. Still, Minka has managed to get the best out of a less than ideal situation and produce a quiet fan without abandoning its motor design.

What Makes It Stand Out

One of the most notable features of the Minka-Aire F844 (and one of the reasons I included it on this list) is the remote control. This is an excellent detail if you’re looking for a bedroom fan, as it allows you to change the settings without having to get up.

But keep in mind that, although it has a reversible motor, the remote doesn’t have a control button for the blade direction. You can, however, change the direction of the fans manually (there’s a button on the motor).

Although it’s an excellent choice, there are a few things about this fan that I don’t like. It’s extremely quiet, especially for such a large fan. Yet, it also consumes 65 watts.

On top of that, the downrod isn’t included in the package — you have to buy it separately. Since this is a protruding model that you can’t mount directly onto the ceiling, that is less than ideal.


  • Remote control
  • 3-speed direct drive motor
  • Energy Star certified
  • The fan has an integrated dimmable LED light fixture

Why Do Ceiling Fans Make Noise in the First Place?

In all honesty, no matter how much you try, you won’t be able to find a fan that doesn’t produce any noise. Due to its main job, which is to move air at various speeds, complete silence simply isn’t an option. This is true for all fans, not just the ceiling ones.

However, that doesn’t mean that the noise should be deafening. If your fan is making too much noise, then there’s probably something wrong with it. There might be an issue with:

  • The blades — Warped or dirty blades will wobble when you turn the fan on. This oscillation isn’t supposed to happen as it not only produces additional noise but also overburdens the motor. When the blades are dirty or warped, you’ll probably hear a lot of rubbing and rattling sounds.
  • Loose hardware — All it takes is one loose screw to ruin your peaceful night of rest. If the hardware isn’t screwed tightly enough, the integrity of the entire structure will be compromised. When that happens, you’ll have a lot more than simple noise to deal with, given that the ceiling fan might fall or get damaged.
  • Motor malfunction — If the motor isn’t functioning properly, you might hear some grinding sounds.

If you’re looking to find out more about the causes of excessive fan noise (and how to fix them), make sure to read my article on fixing noisy ceiling fans.

Keep It Light and Breezy

And there you have it, folks — my top picks for the best quiet ceiling fans. When it comes to silence, all of the choices on my list are excellent, so the decision is entirely up to you and will be based on the features you like. I tried to cover everything from design to power efficiency. Therefore, you should be able to find the perfect option for you.

Ultimately, I’d recommend getting a fan that has a DC motor, which proved to be quite superior to the rest. However, such fans tend to be somewhat expensive. Others, which have different motors, are more affordable and can also provide excellent airflow without making excessive noise. Either way, each fan on my list should satisfy your needs and be a faithful companion for years to come!

The post Best Quiet Ceiling Fans to Keep You Cool at Night appeared first on Soundproof Living.

https://soundproofliving.com/quiet-ceiling-fans/feed/ 0
Quiet Box Spring Alternatives to Get If You’re Sick of the Squeak https://soundproofliving.com/quiet-box-spring/ https://soundproofliving.com/quiet-box-spring/#respond Mon, 29 Jun 2020 16:17:59 +0000 http://soundproofliving.com/?p=8950 Like most people, I like my bed to be tall enough to easily get into and bouncy enough to maintain its shape. But if those …

Quiet Box Spring Alternatives to Get If You’re Sick of the Squeak » Read More «

The post Quiet Box Spring Alternatives to Get If You’re Sick of the Squeak appeared first on Soundproof Living.

Like most people, I like my bed to be tall enough to easily get into and bouncy enough to maintain its shape. But if those properties also make it creak every time I roll over in my sleep, I may be willing to give them up. Now, a box spring isn’t really an unavoidable part of your sleeping setup anymore. Still, if you’d prefer to keep some of that height and bounce, you could look into some quiet box spring alternatives.

Throwing out the old box spring and getting a quiet alternative.

Of course, if money is a big concern, you can try to fix your old box spring before shopping for alternatives. However, in this article, you may discover that you don’t even need a box spring. So let’s start there — what are box springs, anyway, and are they a must?

What Are Box Springs?

Before we go any further, we need to have a clear idea of what a traditional box spring is. That should help us narrow down the list of things that could conceivably replace your squeaky mattress foundation.

And that’s basically what box springs are. While your mattress is there to support your body, a box spring should support the mattress.

Traditional box springs used to be simple wooden frames filled with wire coils, which made the compressed-cotton mattresses of yore more comfortable to sleep on. However, since we all tend to stick to certain sleeping positions, some of the coils would sag faster than others.

Between the sagging and corrosion, it’s only natural that those springs would eventually start squeaking. All of these factors made manufacturers reconsider the design of the box springs and introduce the torsion modular system.

Torsion units had a firm wooden base and strong bent wires that held up the flat metal grid top. The metal wires still had some give, but not as much as traditional coil springs.

Still, even that design fell out of vogue about a decade ago, but not before inspiring the next generation of mattress foundations. Those also had a wooden base and a metal grid top, supported by different wire patterns.

At that point, mattresses were mostly made of foam anyway, so there was no need for the box spring to add to their flexibility. Instead, it only had to provide additional height — as explained in this video.

The Benefits of Having a Box Spring

Initially, there were several benefits to using a box spring. It would:

  • Increase the flexibility of the sleeping surface at a time when most mattresses were decidedly inflexible.
  • Increase the height of the bed, allowing us to get on and off more easily.
  • Prevent the flow of dust from the floor up onto the mattress, thanks to the fabric cover of the mattress foundation.
  • Increase the flow of air to the mattress, thereby allowing it to maintain a comfortable temperature, which prevented bacterial growth.

Nowadays, we still appreciate many of these box spring features. As you will see, most of the quieter alternatives on my list should check off at least one of these boxes. However, there is one thing that shouldn’t be an issue.

As evidenced by the history of box spring design, we have slowly moved from more to less flexible units. As we have advanced past compressed cotton mattresses toward soft memory foam ones, flexibility has fallen down on the list of requirements for mattress foundations. That’s exactly what should make it easy to find quiet alternatives to box springs.

After all, the only way that a box spring can make your bed bouncier is by using flexible wire coils. And as we have established, those inevitably corrode and become squeaky. Fortunately, units that don’t have them are usually much quieter, so we should focus our search on them.

Are Box Springs Obsolete?

At this point, there is one question we should all be asking. Namely: do we even need box springs?

In short, most modern mattresses don’t require one. As I have mentioned above, memory foam and latex mattresses are so malleable that they wouldn’t get anything out of a springy base. However, they do usually need a firm surface, at least. That’s something you’ll have to keep in mind when shopping for box spring alternatives.

Now let’s take a moment to reflect on the other benefits of having a box spring. Are there any other products that could provide a sufficiently tall base to lay your mattress on? In a word: yes.

For example, bed frames come in all sorts of dimensions, and some even have adjustable heights. I would even say that some tall bed frames prove how utterly unnecessary box springs are. Instead of wasting all that space on a hollow box, you get to double the storage space under the bed.

What about airflow? Can any box spring alternative provide free airflow to your mattress while preventing dust from coming up? Well, some of the options on my list may still allow air to reach your mattress if you have a model that absolutely needs ventilation.

But that’s something you should check in your mattress warranty before worrying about it. So before you look through the box spring alternatives I’ve listed below, dig out those papers and find out if a mattress foundation is required to keep your warranty valid.

Quiet Box Spring Alternatives

Now that we know everything about box springs, let’s take a moment to consider some alternatives. Most of these solutions would give you at least some of the benefits I’ve listed above. However, they simply don’t produce the kind of noise box springs are (in)famous for.

1. Get a Bunkie Board (aka Slats)

Bed slats a quieter box spring alternative.

Bunkie boards or slats are the simplest type of mattress foundation you could imagine. They can be either metal or wood — which can affect their general shape.

For example, metal units like this one from Zinus are generally rectangular frames with slats running along the length of the frame. If they’re supposed to fit into a large bed frame, they often have a support beam in the middle that prevents the slats from dipping.

While you could conceivably find a welder to make you a custom metal bunkie board, the ones you can find online will do the job just fine. Better still, most of them are incredibly easy to assemble with next to no tools.

Wooden bunkie boards are a simplified version of what we’ve just seen. Instead of having complete rectangular frames that support the slats, these yellow pine slats are held together by two strips that have been stapled to the bottom of the boards. Wooden slats can be as sturdy as metal ones and more flexible, especially if you get the curved kind.

Classic Brands Xtreme Heavy-Duty Solid Wood Bed Support Slats | Bunkie...
  • 38.875" W x 72" L x 0.75" H
  • Measure The Width Inside Your Bed Frame...
  • Mattress can be placed directly on bed slats
  • Strongest wood bed slats available on the...

Overall, though, I wouldn’t say that these kinds of products can give your bed any additional height or bounce. However, they provide a firm base and plenty of ventilation, should your mattress need it.

What’s more, bunkie boards are also easy to customize if you want to prevent dust from wafting up into the mattress from the floor under the bed. Just lay some fabric over the slats,and your mattress will be free of dust bunnies.

2. Platform Bed

Platform bed as a quiet box spring alternative.

If you’re looking to achieve great height and airflow, the simplest solution would be to get a tall platform bed. I’ve recommended several of them in my article about quiet bed frames. As you’ll notice if you look through my list of favorites, they come in all shapes and sizes.

For example, the Shawn mattress base from Zinus has a very basic design. It looks like a simple metal bunkie board with three pairs of legs. The metal platform beds from Dikapa and Simlife are much more intricate due to the addition of headboards and footboards. But of course, metal isn’t the only material you can work with.

I have included several wooden platform beds on my list, as well as one upholstered unit with a steel frame. Ultimately, these beds are everything you could ever want — and most of them can’t be used with a box spring anyway. But do they provide any of the box spring benefits I’ve listed above?

Well, depending on the frame you get, the mattress platform could be anywhere between seven and fourteen inches off the ground. Granted, those numbers are taken from the products I’ve mentioned in my previous article. So really, your bed could be even taller than that! Remember, you’ll have to take the thickness of your mattress into account, which would add 4–14 inches.

Clearly, most modern mattresses don’t need the enhanced flexibility a box spring used to provide. However, if you feel like you need that extra bounce, you could pair your platform bed with curved slats. Slats, in general, are going to be your best friend when it comes to ventilation as well. So, you see, platform beds can give you pretty much everything a box spring would.

3. Pallets

Pallet bed as a box spring alternative.

Wooden pallets are a great option if you want to give your mattress the support and ventilation it truly needs. Not only are pallet beds insanely picturesque, but they’re also incredibly customizable. You’ll get the exact height and size that would suit you and your mattress. And since pallets are made to support and transport heavy items, they should have no problem holding your mattress.

Best of all, the materials should be pretty easy to come by. You’ll just have to hop over to any home improvement store and get a bunch of pallets. Alternatively, you could ask a friend who works in construction or storage to give you some at a discount price.

Once you have the pallets, you can stain or paint them before building your bed. Furthermore, when you decide to set them up, you may not even have to use tools. If you’re going to stack more than two layers on top of each other, though, I recommend using nails or screws to hold them in place.

The results will vary depending on the stain, setup, and accessories you use. You might want to look at photos of similar projects for inspiration before you start crafting.

No products found.

If you keep your pallet bed plain and put it against a brick wall, it’ll give off an industrial vibe. But if you use a dark stain and surround it with plants, it’ll look more natural and earthy. And you don’t even have to make the bed match the room — if your space needs an accent piece, you can paint the pallets yellow or red!

4. Adjustable Bed

Adjustable beds may look similar to platform units at first glance, but they’re anything but. In fact, the similarities end at the basic shape the bed has while it’s in the horizontal position. But — you guessed it — adjustable beds have motorized bases that can change their shape for more upright or prone (horizontal) resting.

Originally, adjustable beds only had two positions and sliding controls that let you choose any stage between the two. That’s still how many hospital beds work. You can be completely horizontal, upright, or choose a position between those two extremes.

Nowadays, most home units, like this one from Leggett & Platt, understandably have a greater range of motion. Users can individually adjust the head, body, and feet sections, and even the overall angle of the bed. That also means that you’ll have a pretty decent selection of heights to choose from. After all, these units can become taller at the press of a button, even if only at the head or foot side of the bed.

Leggett & Platt Signature Adjustable Bed Base with Ultra-Quiet Motor...
  • Queen adjustable base with full-body, head...
  • Designed with gray upholstery, 4" legs with...
  • Body angle adjustments can potentially reduce...
  • Back-lit wireless stand-up remote includes an...

Of course, adjustable beds are also incredibly flexible — they have to be. But they also need to provide a firm base for your mattress. Some manufacturers claim that their beds can accommodate any kind of mattress, though I’d recommend sticking with memory foam ones.

The one thing I am not able to promise, though, is that your mattress will have plenty of ventilation. But at least the closed mattress platform will prevent dust from getting inside it.

Having expanded on the benefits of adjustable beds, I ought to note one disadvantage. Because they are motorized, many of them can be pretty loud. That’s not to say that you can’t find a quiet unit if you try.

5. Don’t Use a Bed Frame at All

Instead of using a box spring put the mattress on the floor.

To be clear, setting your mattress directly on the floor won’t give you any of the benefits I’ve listed above. It won’t make your mattress any bouncier or allow it to cool from below. However, you should keep in mind that some mattresses don’t require any help to maintain a reasonable temperature or flexibility.

It’s not as if keeping your mattress on the floor is a new trend. Cultures all over the world have practiced sleeping on the floor — in a sense — for centuries! Naturally, they often use some kind of barrier between the floor and the body. In many East Asian countries, people think nothing of setting a futon down and snoozing on the floor.

But if that’s too adventurous for you, you can stick to your memory foam mattress. Unlike some mattresses I’ll warn you against later on, foam ones don’t emit any kind of noise. What’s more, their warranties usually state that it’s best to use them without any kind of box spring. All they need is a flat, hard surface to maintain their shape — so a floor should work.

But if you want to be fancy about it, there are a few ways to ensure that your mattress doesn’t get dusty, at least. You could put down:

Alternatively, you could put your mattress in a waterproof but breathable hypoallergenic case to protect it from all sorts of mites and mishaps.

SafeRest Mattress Protector – Queen, Premium, Cotton, Waterproof...
  • Protects Against Urine, Fluids, Perspiration
  • Cotton Terry Surface With Membrane Back...
  • Great For Those With Kids, Pets Or...
  • Will Not Change The Feel of Your Mattress...

So, even though this alternative doesn’t provide any of the benefits a box spring might give you, it’s still an undeniably silent base for your mattress. I would wholeheartedly recommend at least trying it out.

Why I Don’t Recommend Spring Mattresses as Alternatives

In the course of my research, I came across some box spring alternatives I wouldn’t be able to recommend. So, I wanted to take a moment to explain why I didn’t mention some of them.

Innerspring mattresses are my least favorite option. These products were a huge hit when they first flooded the market because they incorporated the flexibility of a box spring into the mattress design.

The mostly cotton stuffing was supported by a network of wire coils. But remember: coils actually made most traditional box springs super noisy. Even worse, many double-sided innerspring mattresses still require box springs to maintain their shape! Essentially, you would have to get not one, but two potentially noisy products.

Hybrid mattresses are similarly deficient, as they have both foam and coil layers. However, unlike the previous type of mattress I explained, this one clearly separates the two. Usually, the coils make up the base of the mattress, while the foam is on top, which eliminates the springy feeling of sleeping on top of wires.

Still, I’d much rather avoid springs altogether when looking for quiet box spring alternatives. After all, they’re generally the sole culprit behind most noises you hear coming from your mattress foundation.

Did We Find the Ultimate Box Spring Alternative?

As we have established, box springs are, by no means, a mandatory part of your sleeping setup. Their main job is to provide a firm yet pliable base for your mattress and thereby extend its lifespan. What’s more, they need to raise the mattress to a more traditional height. But even if you like sleeping on clouds, some of them take it way too far.

Ultimately, your bed doesn’t need to be any taller than 20 inches. However, if that’s your thing, several of the products I’ve mentioned will get you over that mark if you use them together with a thick mattress. If your biggest concern is avoiding any kind of creaking whatsoever, though, you can’t go wrong with setting your mattress down on the floor — that is, as long as that floor isn’t creaky.

So, what do you say? Did I manage to find a quiet box spring alternative you like? If one of the products I’ve mentioned has caught your eye, I encourage you to keep doing your research. After all, the Internet is full of wonderful bedroom ideas — you might be a Pinterest dive away from your perfect boudoir.


The post Quiet Box Spring Alternatives to Get If You’re Sick of the Squeak appeared first on Soundproof Living.

https://soundproofliving.com/quiet-box-spring/feed/ 0
The Quietest Electric Toothbrushes on the Market https://soundproofliving.com/quiet-electric-toothbrushes/ https://soundproofliving.com/quiet-electric-toothbrushes/#respond Tue, 16 Jun 2020 23:57:55 +0000 http://soundproofliving.com/?p=8914 If you often struggle to thoroughly clean your teeth with a manual toothbrush, you may be looking into getting an electric one. They’re so easily …

The Quietest Electric Toothbrushes on the Market » Read More «

The post The Quietest Electric Toothbrushes on the Market appeared first on Soundproof Living.

If you often struggle to thoroughly clean your teeth with a manual toothbrush, you may be looking into getting an electric one. They’re so easily accessible nowadays that you could probably get one at your local supermarket — but should you? Considering the amount of noise some of these devices make, I recommend that you focus your search on the quietest electric toothbrushes on the market.

Brushing teeth with a quiet electric toothbrush.

Most people brush their teeth immediately upon waking up or right before going to bed. So, you wouldn’t want to use a device that would chase away any thought of slumber or annoy you when you’re at your groggiest.

Of course, many think that the benefits of electric toothbrushes outweigh any disadvantages. After all, they:

  • Remove more plaque than manual toothbrushes despite being easier to use, especially for people with arthritis or other mobility problems
  • Signal when the user should stop brushing, thereby ensuring a thorough cleaning
  • May reduce the risk of gum disease (which harsh manual toothbrushes often encourage).

Still, if you can enjoy these benefits with any electric toothbrush, you might as well get one that won’t vibrate too much. Fortunately, I have several recommendations that will clean your teeth without annoying you!

List of the Best Quiet Electric Toothbrushes

Electric toothbrushes are devices I wanted to be especially careful about when vetting them. Because of that, I mostly focused on reliable, tried-and-tested brands when I was looking for viable candidates. Going forward, I will highlight what I consider to be the best product from a company’s lineup and present some of the alternatives. So here are some of the quietest toothbrushes you can get today.

1. Oral-B Pro 7000 SmartSeries Powered by Braun Black Electric Toothbrush

Oral-B is one of the better-known electric toothbrush brands, so I want to start us off with one of its products. Even though the company has produced many notable devices, I want to focus on the Oral-B Pro 7000.

Like most Oral-B devices, this toothbrush is compatible with all of the company’s brush heads. However, the kit includes five of them — two CrossAction heads, in addition to ProWhite, FlossAction, and Sensitive Clean ones. The product also comes with a travel case that can fit the body of the device and two of those brush heads.

Electric Toothbrush, Oral-B Pro 7000 SmartSeries Black Electronic Power Rechargeable Toothbrush with Bluetooth Connectivity Powered by Braun

You can access the six brushing modes by pressing the power button. Most of the time, you’ll want to keep the device on the daily clean setting. The other options include tongue cleaning, whitening, gum care, sensitive, and pro-clean modes.

As is usually the case, the toothbrush will run for two minutes before shutting off, ensuring optimal use. It will also connect to the company’s smartphone app, where you can keep track of your brushing habits. If you spend too much time in one place or press too hard, the Triple Pressure Sensor on the device will remind you to ease up.

The lithium-ion battery can last for up to two weeks on a single charge, and it should take about a day to recharge fully. As for the noise, according to the company, its devices may be a bit noisy during the first few uses. However, the sound will probably dissipate as you continue to use the toothbrush.


  • Six brushing modes and a pressure sensor
  • Bluetooth-enabled connectivity to the Oral-B app
  • Comes with five round Oral-B brush heads
  • 60-day money-back guarantee

» See Oral-B Pro 7000 on Amazon «

More Oral-B Electric Toothbrushes

Now, the unit I’ve just reviewed isn’t even the most recent one in the lineup. The 7500 model offers more customization, such as changing the color of the LED SmartRing around the top of the device. That toothbrush even has the Amazon Dash Replenishment feature, which allows you to automatically order replacement brush heads when you need them.

Even more recently, the company released its Oral-B Genius 9600 electric toothbrush. The most notable difference between the previous products I’ve listed and this one is in its unique travel case, which can charge both the brush and your smartphone. The device comes in three colors, aside from the usual black and white options, including orchid purple, rose gold, and sakura pink.

If these units are anything like the one I reviewed above, they may be noisy when you start using them. However, the vibrations should subside over time. And either way, you can always return the product if it doesn’t work out — as long as you do it within 60 days of the purchase.

2. Philips Sonicare 6100 Protectiveclean Electric Toothbrush

Philips is another electronics company that has made great strides on the electric toothbrush market. Actually, the company produces sonic, rather than electric, toothbrushes for its Sonicare line. I’ll explain the main differences between the two later on. For now, it’s enough to say that sonic toothbrushes oscillate at higher frequencies and are therefore quieter than electric ones.

Philips Sonicare HX6877/21 ProtectiveClean 6100 Rechargeable Electric Toothbrush, White

The Philips Sonicare ProtectiveClean 6100 comes with a single DiamondClean brush head, a travel case, and a charging stand. The white and pink versions of the device come with a white case, while the purple and navy blue ones get a black case. Like most other devices in this series, this one utilizes BrushSync technology, which allows it to keep track of when you need to switch out the brush head.

The device has two buttons on it. The power button allows you to choose from three cleaning modes, while the one underneath lets you select the intensity of the oscillation. If noise is your primary concern, stick to using the device on the slowest setting.

Naturally, the toothbrush has a built-in timer that will shut it off after two minutes. Additionally, the device will emit a sound every 30 seconds, reminding you to move the brush to another quadrant of your mouth.

According to the company, the toothbrush should hold a charge for about two weeks. However, many users note that it usually lasts for over a month.


  • Three cleaning modes and three intensity options
  • Built-in timer and pressure sensor
  • Includes a single brush head
  • BrushSync technology tells you when you need a replacement

» See Philips Sonicare 6100 on Amazon «

More Philips Electric Toothbrushes

If you’d like to try a more basic unit first, I recommend that you get the Sonicare ProtectiveClean 4100. It is a sonic toothbrush that utilizes BrushSync technology as well, like the one I’ve just reviewed, but it only has one cleaning mode. Still, the average user won’t need more than the built-in QuadPacer timer and pressure sensor this unit offers.

And if you’d like to see an even more high-end product from Philips, you can’t go wrong with the DiamondClean Smart 9750 sonic toothbrush. At the highest speed setting (of three), this toothbrush can achieve a whopping 62,000 brush strokes per minute. It also has five, rather than three, cleaning modes and built-in app connectivity to help you track your oral care habits.

3. Fairywill Sonic Electric Toothbrush 507

Now that we’ve talked about two of the most famous electric toothbrush brands, let’s take a look at some of their lesser-known competitors. If you’ve never had to shop for an electric toothbrush, you may not be familiar with Fairywill. But trust me — the company and its products are approved by the American Dental Association and popular with consumers. With that in mind, let’s talk about the device I’ve decided to highlight.

Fairywill Electric Toothbrush Powerful Sonic Cleaning - ADA Accepted Rechargeable Toothbrush with Timer, 5 Modes, 3 Brush Heads, 4 Hr Charge Last 30 Days Whitening Toothbrush for Adults and Kids

Like the previous unit I reviewed, the FW-507 is a sonic toothbrush, rather than a basic electric one. According to the company, it performs about 40,000 micro-brushes per minute, giving you a thorough cleaning without the overwhelming buzzing sound.

Despite the fast motor, the battery of the device should last for about a month without needing to be charged. Better still, it’ll only take four hours to reach a full charge, rather than the usual twenty-four.

There is only one button on the device, which can switch between the five cleaning modes indicated on the display below it. The toothbrush will only be active for two minutes in total, pausing every thirty seconds to indicate that you should change the area you’re focusing on.

Finally, the product comes with three brush heads with separate hygienic protective covers. Since the brush bristles are vibrantly colored, their fading hue will indicate when you need to get new ones. The bristles will also complement the body of the device; you’d get blue ones for your black or white toothbrush, and pink bristles for the pink device.


  • Five cleaning modes and three intensity options
  • Built-in timer with interval pausing
  • Comes with three brush heads
  • One charge lasts for about a month

» See FW-507 on Amazon «

More Fairywill Electric Toothbrushes

Fairywill has only been in business since 2016, so I don’t have many alternatives to offer. Even though the 508 unit was the natural successor to the one I’ve just reviewed, it’s not a notable improvement. Still, you could get it if you happen to prefer its design.

There are also other versions of the product, like the 508 kit that comes with eight brush heads and a travel case. Alternatively, if you’re shopping for yourself and your partner, you could get the 508 dual kit. It includes one black and one pink toothbrush with four brush heads and travel cases for both devices.

4. AquaSonic Black Series Ultra Whitening Toothbrush

Despite having several noteworthy products, the AquaSonic brand is something of an enigma. As far as I can tell, the brand itself doesn’t manufacture electric toothbrushes. Instead, it’s an American company that puts its name on products it gets from foreign manufacturers — which isn’t necessarily a bad thing. In fact, judging by the success of the company’s Black Series Ultrasonic Whitening toothbrush, I’d say that it’s doing a great job of marketing its products.

AquaSonic Black Series Ultra Whitening Toothbrush - 8 DuPont Brush Heads & Travel Case Included - Ultra Sonic 40,000 VPM Motor & Wireless Charging - 4 Modes w Smart Timer - Modern Electric Toothbrush

Like the previous unit I reviewed, this device has a motor that does about 40,000 rotations per minute. According to the company, the waterproof device hides a lithium-ion battery that is charged wirelessly rather than through a USB port.

The toothbrush has four cleaning modes and a vibrating timer that will remind you to move every thirty seconds and power down after two minutes. It also comes with eight identical brush heads, which should last you at least two and a half years. However, only two of them will fit in the hard travel case that comes with the device.

Even though this device is reasonably quiet, there are disadvantages to buying your electric toothbrush from brands that are not quite established. Namely, I’d be concerned about the long-term availability of replacement brush heads, product warranties, and customer support. Still, if you just want to sample the features we’ve been discussing at a lower price point, this toothbrush may be exactly what you’re looking for.


  • Four cleaning modes and three intensity options
  • Built-in timer with interval pausing
  • Comes with eight identical brush heads
  • Wireless charging

» AquaSonic Black Series on Amazon «

More AquaSonic Electric Toothbrushes

If black isn’t your color, AquaSonic has other product lines you might want to check out. The Vibe Series toothbrushes have pretty much the same features as the product I reviewed above. They’re waterproof devices with four cleaning modes, eight replacement heads, and a hard travel case. However, the Vibe Series devices are available in optic white, charcoal metallic, and satin rose gold.

Alternatively, you could get a matching set for two in black and white. Both devices are identical to the ones I’ve described, except that they each come with five replacement brush heads. They also have a modern-looking half-black, half-white wireless charging base that can hold both brushes at the same time.

Features to Look for When Shopping for the Quietest Electric Toothbrushes

Even though electric toothbrushes have been around for decades, the number of trustworthy brands on the market is decidedly underwhelming. Perhaps that’s why many of the devices I’ve showcased have similar features — there is no competition to drive innovation.

Still, finding the quietest electric toothbrushes is relatively easy. So let’s see how you might spot them in the modest multitude of available products.

Sonic vs. Electric Toothbrushes

As I have mentioned, there is a crucial difference between electric and sonic toothbrushes. Electric units are generally cheaper and have slower motors, which should give them the advantage as far as noise levels are concerned. After all, hair clippers with slow, rotary motors tend to be quieter than the ones with faster, magnetic motors. But apparently, the opposite is true in the world of electric toothbrushes.

Sonic units operate at a brisk pace of about 260 oscillations per second, resulting in at least 30,000 brush strokes per minute. As we have established, some of them can manage much greater speeds. However, because they’re so fast, they vibrate at higher frequencies, which makes them appear quieter.

Ultimately, all these devices vibrate in one way or another. You’d be hard-pressed to find a completely silent one. Still, there are other features that may indicate the noise level of a certain product.

Cleaning Modes and Speed Settings

Most of the toothbrushes on my list have a single power button that controls a handful of cleaning modes. You get to choose from different vibration patterns when brushing your teeth.

For regular daily cleaning or polishing, most toothbrushes will vibrate at a constant buzz. However, a massage setting would produce a pulsating sensation. Obviously, that would also affect the kind of noise your toothbrush makes, so it can be useful to have more options.

The speed (or intensity) settings are another area where you might benefit from having more options. Usually, using electrical devices on the slow settings is all it takes to reduce the sound they make. So if you’re in the market for a new electric toothbrush, that might be something to consider.

Battery and Charging

A few years ago, one of the main differences between electric and sonic toothbrushes was that the former had removable batteries while the latter had built-in ones. Nowadays, the two are pretty much equal on that front. Most toothbrushes have rechargeable lithium-ion batteries that last between two weeks and a month.

When you think about it, the reason these devices last so long is pretty clear. Thanks to the built-in timers that only let electric toothbrushes run for two minutes at a time, these devices are only used for four minutes per day. It’s no wonder that you’ll get to use them for several weeks between charging them!

And there are several ways you might go about charging your toothbrush. Most of them come with micro-USB cords that should charge the battery within twenty-four hours. But we’ve also seen devices that claim to be able to do that within four hours.

Alternatively, you could look for toothbrushes that come with wireless charging stations. Those devices are usually fully waterproof, which can’t be said about the ones that use USB charging cords.

Brush Heads and Other Accessories

The majority of the products I’ve listed come with at least one brush head, but some include different types of replacement brush heads as well.

Some manufacturers’ brush heads are rougher than others, depending on the way they were cut. While most low-range toothbrushes have sharp bristles, higher-end products have gentler bristles with rounded ends.

You may also want to consider the shape of the brush head. Most companies use the basic oval shape and make the brush heads vibrate up and down on the base — or rather, side-to-side on your teeth. However, Oral-B devices have circular brush heads that rotate, cleaning around each tooth.

In addition to the brush heads, travel cases are the only other accessory we’ve seen across the board. Most manufacturers make them out of hard plastic. There are usually three slots in the case — one for the device itself and the other two for your brush heads.

If you anticipate that you will travel with your electric toothbrush, you may want to focus your search on devices that come with a travel case. Alternatively, you could repurpose any other box of a similar size and just pad the inside with cloth before putting your toothbrush in.

An electric toothbrush wrappen in a towel. Making an electric toothbrush quieter.

How to Make Your Electric Toothbrush Quieter

As I have previously mentioned, hearing some of the vibrations coming from your toothbrush is pretty much unavoidable. Some devices will certainly be less noisy than others, but that still doesn’t guarantee absolute silence. Even worse, muffling sounds that are coming from a toothbrush is easier said than done. Still, we’re going to try to make it happen.

Understand Where the Noise Is Coming From

First things first, you’ll have to find exactly where the noise is coming from. Turn on your toothbrush and listen to the sound. Usually, it’s the loudest where the base of the device connects to the brush head. After all, that’s the main exposed moving part of the toothbrush.

However, if the build quality of the body itself isn’t all that it should be, you may even be hearing the motor itself. That’s why you’ll need to make sure that the toothbrush you choose is durable and maybe even waterproof. If water can’t get into the device, noise may not be able to come out.

If your toothbrush isn’t rechargeable but uses AA or AAA batteries instead, you may hear them rattling inside the device as well. Fortunately, there are ways to muffle that sound with items you already have in your bathroom.

Wrap a Towel Around the Toothbrush

The easiest way to dampen the sound and vibrations coming from your toothbrush is to wrap a towel around it. You don’t have to make it fancy — just make sure that you’re completely covering the base. Additionally, you can cover the part where the brush head connects to the device. That should significantly reduce the volume of sound the toothbrush produces.

If you’re crafty, you could sew a thick sleeve for the device, as long as you don’t keep it on permanently. That may cause the motor and battery to overheat, which would lead to bacteria growth, especially when you take into account the water coming down from the brush head. So, take the sleeve off when you’re not using the toothbrush and wash it every other week.

Charge the Battery When It’s Empty

If you use your toothbrush for long enough, it may get louder over the course of a few weeks. That may have something to do with the battery running out of juice, which can affect the performance of the motor. So before you start throwing a fit, check if your device is fully charged.

Of course, lithium-ion batteries aren’t made to last forever — they deteriorate over time. But recharging them every other day to keep them at full charge may be detrimental. Don’t keep them on their charging base if you don’t have to.

Replace Your Brush Head

Even though the base of your toothbrush is made to last, that’s not necessarily the case for brush heads. The parts inside them will start to wear down after some time, which may lead to an increase in noise. To prevent that, replace your brush head every three or four months.

Soundproof Your Bathroom

If you’re more worried about waking your roommate or partner with the buzzing of your toothbrush, you could make sure the noise can’t escape the bathroom. Check out my guide to soundproofing a bathroom. Just focus on the doors and any other cracks in the walls that might let the sound seep out.

Keep Your Pearly Whites Fresh and Clean

At this point, you should know what you can expect from your electric toothbrush. Though some are quieter than others, most of them produce some noise, even if it’s only low-level buzzing. So, while you should get one of the quietest electric toothbrushes I’ve reviewed, don’t expect it to be entirely noiseless. If you implement the tips I’ve explained above in addition to getting a quiet device, though, your morning and evening routines are sure to be more relaxing than ever!

The post The Quietest Electric Toothbrushes on the Market appeared first on Soundproof Living.

https://soundproofliving.com/quiet-electric-toothbrushes/feed/ 0